2005 Ford Crown Victoria Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2005 Ford Crown Victoria alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant Power 12v+ Wire (+) | Light Green/Purple |
Battery Constant Power 12v+ Wire Location | At Ignition Switch Harness |
Ignition Wire (+) | Purple/Orange |
Ignition Wire Location | At Ignition Switch Harness |
Second Ignition Wire (+) | Gray/Yellow |
Second Ignition Wire Location | At Ignition Switch Harness |
Accessory Wire (+) | White/Light Blue |
Accessory Wire Location | At Ignition Switch Harness |
Second Accessory Wire (+) | White/Purple |
Second Accessory Wire Location | At Ignition Switch Harness |
Starter Wire (+) | Dark Green |
Starter Wire Location | At Ignition Switch Harness |
Second Starter Wire (+) | N/A |
Second Starter Wire Location | N/A |
Ground Wire | Chassis |
2005 Ford Crown Victoria Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2005 Ford Crown Victoria alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Brake Light Wire (+) | Light Green/Red |
Brake Light Wire Location | At Switch Above Brake Pedal |
Dome Light Supervision Wire | Black/Light Blue |
Dome Light Supervision Wire Location | At LCM (Lighting Control Module) located to the right of the steering column. |
Door Trigger Wire (+) | Dark blue and black/orange wires. The drivers door is a dark blue wire (-) in the Gray 22-Pin Plug, Pin 11. The black/orange wire (-) covers all other doors and is in a Gray 16-Pin Plug, Pin 11. When connecting to an alarm system use both door trigger wires and diode isolate each wire. |
Door Trigger Wire Location | At LCM (Lighting Control Module) located to the right of the steering column. |
Hood Pin Switch Wire (-) | N/A |
Hood Pin Switch Wire Location | N/A |
Horn Wire (-) | Dark Blue |
Horn Wire Location | At LCM (Lighting Control Module) located to the right of the steering column. |
Key Sense Wire (+) | N/A |
Key Sense Wire Location | N/A |
Parking Light Wire (-) | White/Black |
Parking Light Wire Location | At LCM (Lighting Control Module) located to the right of the steering column. |
Power Door Lock Wire (-) | Pink/Yellow |
Power Door Lock Wire Location | In Driver Kick Panel |
Power Door Unlock Wire (-) | Pink/Light Green |
Power Door Unlock Wire Location | In Driver Kick Panel |
Tachometer Wire (-) | Any Wire NOT White/Red |
Tachometer Wire Location | At Any Fuel Injector |
Trunk Pin Switch Wire (-) | N/A |
Trunk Pin Switch Wire Location | N/A |
Trunk Release Wire (-) | Purple/Yellow The trunk release system on this vehicle is a 5-wire circuit and will require an extra Relay) |
Trunk Release Wire Location | In Driver Kick Panel |
Factory Alarm Arm Wire (-) | N/A |
Factory Alarm Arm Wire Location | N/A |
Factory Alarm Disarm Wire (-) | N/A |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | Ford Transponder Anti-Theft System |
Factory Anti-Theft System Location | Transponder at Ignition Switch Tumbler |
Factory Immobilizer Bypass | Requires Immobilizer Bypass Module |
Feel free to use any 2005 Ford Crown Victoria alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2005 Ford Crown Victoria car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2005 Ford Crown Victoria.