2004 Nissan Murano Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2004 Nissan Murano alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Green |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Black/Red (When installing a remote starter, you must use both starter #1 and starter #2 wires. Both wires must be connected to the starter/cranking output wire from the remote starter or the vehicle will not remote start when the engine is cold.) |
Starter Positive Wire Location | Ignition Switch Harness |
Secondary Starter Positive Wire (+) | Black/Yellow (When installing a remote starter, you must use both starter #1 and starter #2 wires. Both wires must be connected to the starter/cranking output wire from the remote starter or the vehicle will not remote start when the engine is cold.) |
Secondary Starter Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Black/Red |
Ignition Positive Wire Location | Ignition Switch Harness |
Accessory Positive Wire (+) | Red |
Accessory Positive Wire Location | Ignition Switch Harness |
Secondary Accessory Positive Wire (+) | White/Blue |
Secondary Accessory Positive Wire Location | Ignition Switch Harness |
2004 Nissan Murano Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2004 Nissan Murano alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Positive Wire (+) | Red/Blue |
Parking Light Positive Wire Location | In Drivers Kick Panel, Harness To Rear Of Vehicle |
Power Door Lock Negative Wire (-) | Blue |
Power Door Lock Negative Wire Location | At Module, In Drivers Door Pin 4. |
Power Door Unlock Negative Wire (-) | Red (Requires a Double Pulse). The left front door is light blue (-) in pin 62. The right front door is red/green (-) in pin 12. The left rear door is red/white (-) in pin 63.t he right rear door is red/white (-) in pin 13. When connecting to an alarm system use all 4 door trigger wires and diode isolate. |
Power Door Unlock Negative Wire Location | At Module, In Drivers Door Pin 6 |
Door Trigger Positive Wire (+) | The left front door is light blue (-) in pin 62. The right front door is red/green (-) in pin 12. The left rear door is red/white (-) in pin 63.t he right rear door is red/white (-) in pin 13. When connecting to an alarm system use all 4 door trigger wires and diode isolate. |
Door Trigger Positive Wire Location | At BCM. The BCM (body control module) is located above the gas pedal. |
Dome Light Supervision Wire Location | At BCM (Pin 48). The BCM (body control module) is located above the gas pedal. |
Horn Negative Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire Location | At Any Fuel-Injector or Ignition Coil |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | Disarms With Unlock, Single Pulse Disarms |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft Wire (-) | Transponder Anti-Theft System. Requires Bypass Module And Extra Ignition Key. |
Factory Anti-Theft Wire Location | Transponder At Ignition Switch Tumbler |
Feel free to use any 2004 Nissan Murano alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2004 Nissan Murano car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2004 Nissan Murano.