2001 Toyota Sienna Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2001 Toyota Sienna alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | White/Red and White/Blue |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Red |
Starter Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Black/Yellow |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | Black/Red |
Second Ignition Positive Wire Location | Ignition Switch Harness |
Accessory Positive Wire (+) | Blue |
Accessory Positive Wire Location | Ignition Switch Harness |
2001 Toyota Sienna Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2001 Toyota Sienna alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Positive Wire (+) | Green |
Parking Light Positive Wire Location | At Bottom Of Fuse Box |
Power Door Lock Negative Wire (-) | Blue/White (The lock and unlock wires will only test while turning the key in the passenger door lock key cylinder.) |
Power Door Lock Negative Wire Location | In Passenger Kick Panel |
Power Door Unlock Negative Wire (-) | Blue/Yellow (The lock and unlock wires will only test while turning the key in the passenger door lock key cylinder.) |
Power Door Unlock Negative Wire Location | In Passenger Kick Panel |
Door Trigger Negative Wire (-) | Red/White |
Door Trigger Negative Wire Location | At Top Right Side Of Fuse Box |
Dome Light Supervision Wire (-) | Red/Black (Requires Relay) |
Dome Light Supervision Wire Location | At Right Side Of Fuse Box |
Horn Negative Negative Wire (-) | Green/Black |
Horn Negative Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | Any Wire Not Black/White , White/Black or Black |
Tachometer Wire Negative Wire Location | At Any Ignition Coil |
Brake Light Positive Wire (+) | Green/White |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | Disarms With Unlock |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft Wire (-) | Transponder Anti-Theft System. Requires Bypass Module And Extra Ignition Key. |
Factory Anti-Theft Wire Location | Transponder At Ignition Switch Tumbler. |
Feel free to use any 2001 Toyota Sienna alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2001 Toyota Sienna car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2001 Toyota Sienna.
2 thoughts on “2001 Toyota Sienna Automotive Alarm Wire Chart”
Miek, not all car alarms are installed the same way. Different brands and different setups will call for different wiring. Our advice is to take your car to a qualified alarm installer and ask them to remove the alarm because it does take some wiring knowledge and experience to know what to remove. Hope this helps. Good luck.
1998 toyota sienna anti theft alarm keeps going off, I would like to disconnect it. The van has 192000 miles on it and I wouldn’t care if it was stolen.