2000 Toyota Tundra Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2000 Toyota Tundra alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | White And White/Red |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Green/Black |
Starter Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Black/Yellow |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | Black/Red |
Second Ignition Positive Wire Location | Ignition Switch Harness |
Accessory Positive Wire (+) | Blue/Red |
Accessory Positive Wire Location | Ignition Switch Harness |
2000 Toyota Tundra Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2000 Toyota Tundra alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | Red/Black |
Parking Light Negative Wire Location | At Steering Column Harness |
Parking Light Positive Wire (+) | Green |
Parking Light Positive Wire Location | In Drivers Kick Panel |
Power Door Lock Negative Wire (-) | White/Green |
Power Door Lock Negative Wire Location | In Either Kick Panel |
Power Door Unlock Negative Wire (-) | Red/Yellow |
Power Door Unlock Negative Wire Location | In Either Kick Panel |
Door Trigger Negative Wire (-) | White/Blue |
Door Trigger Negative Wire Location | At Drivers Door Harness |
Dome Light Supervision Wire | Use Door Trigger, Requires Relay |
Dome Light Supervision Wire Location | N/A |
Horn Negative Wire (-) | Green/Red |
Horn Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | On 6-Cylinder Engines, The Tach Wire Is A Black, On V-8 Engines, The Tach Wire Is A Blue/White, Both Wires Are At The Instrument Cluster In A Brown Plug. On The 6-Cylinder, The Black Wire Can Be Found At The Diagnostic Connector Drivers Side Of Engine And On The 4.7L V8 Engine, You Can Use The Black/Blue Wire At Coil #1 On The Drivers Side. |
Tachometer Wire Negative Wire Location | At Instrument Cluster, In A Brown Plug. |
Brake Light Positive Wire (+) | Green/White |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | Blue/Black |
Factory Alarm Disarm Wire Location | At Drivers Door Harness |
Factory Anti-Theft System | N/A |
Factory Anti-Theft System Location | N/A |
Feel free to use any 2000 Toyota Tundra alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2000 Toyota Tundra car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2000 Toyota Tundra.
2 thoughts on “2000 Toyota Tundra Car Alarm Wiring Diagram”
Roy, as much as we would like to help you, not all car alarms are installed the same way. Different brands and different setups will call for different wiring. Our advice is to take your car to a qualified alarm installer and ask them to remove the alarm because it does take some wiring knowledge and experience to know what to do. Hope this helps. Good luck on your 2000 Toyota Tundra alarm troubleshooting.
The red valet switch beside the steering wheel has come apart with the alarm going and unable to start truck. The system got flaky a few years back so I quit using it. I have been able to reset it until now. Any other way to reset the alarm? I have no need for the alarm, would remove the whole thing or just disconnect it if I knew how. A fuse or wire to remove to kill the alarm and leave the truck working. Its a 2000 toyota Tundra with a gulf states security system installed. Thanks for any help.