2000 Ford Ranger Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2000 Ford Ranger alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant Power 12v+ Wire (+) | Yellow |
Battery Constant Power 12v+ Wire Location | At Ignition Switch Harness |
Ignition Wire (+) | Light Green/Purple |
Ignition Wire Location | At Ignition Switch Harness |
Second Ignition Wire (+) | Black/Light Green |
Second Ignition Wire Location | At Ignition Switch Harness |
Accessory Wire (+) | Gray/Yellow |
Accessory Wire Location | At Ignition Switch Harness |
Second Accessory Wire (+) | N/A |
Second Accessory Wire Location | N/A |
Starter Wire (+) | Red/Light Blue |
Starter Wire Location | At Ignition Switch Harness |
Second Starter Wire (+) | N/A |
Second Starter Wire Location | N/A |
Ground Wire | Chassis |
2000 Ford Ranger Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2000 Ford Ranger alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Brake Light Wire (+) | Light Green |
Brake Light Wire Location | At Switch Above Brake Pedal |
Dome Light Supervision Wire | Yellow/Black (Requires Relay) |
Dome Light Supervision Wire Location | In Driver Door Harness |
Door Trigger Wire (+) | Yellow/Black and Gray/Red |
Door Trigger Wire Location | This vehicle has 2 door trigger wires, a yellow/black wire (-) for the drivers door in the drivers door harness, the passenger door is a grey/red wire (-) located in the passenger door harness. When connecting to an alarm system, use both door trigger wires and diode isolate each wire. |
Hood Pin Switch Wire (-) | N/A |
Hood Pin Switch Wire Location | N/A |
Horn Wire (-) | Yellow/Light Green |
Horn Wire Location | At the steering column wire harness. |
Key Sense Wire (+) | N/A |
Key Sense Wire Location | N/A |
Parking Light Wire (+) | Brown |
Parking Light Wire Location | In Driver Kick Panel |
Power Door Lock Wire (-) | Pink/Yellow |
Power Door Lock Wire Location | In Driver Kick Panel |
Power Door Unlock Wire (-) | Pink/Light Green |
Power Door Unlock Wire Location | In Driver Kick Panel |
Tachometer Wire (-) | Tan/White |
Tachometer Wire Location | At Ignition Coil. |
Trunk Pin Switch Wire (-) | N/A |
Trunk Pin Switch Wire Location | N/A |
Trunk Release Wire (-) | N/A |
Trunk Release Wire Location | N/A |
Factory Alarm Arm Wire (-) | N/A |
Factory Alarm Arm Wire Location | N/A |
Factory Alarm Disarm Wire (-) | Dark Green/Purple |
Factory Alarm Disarm Wire Location | In Driver Kick Panel |
Factory Anti-Theft System | Ford Transponder Anti-Theft System |
Factory Anti-Theft System Location | Transponder at Ignition Switch Tumbler |
Factory Immobilizer Bypass | Requires Immobilizer Bypass Module |
Feel free to use any 2000 Ford Ranger alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2000 Ford Ranger car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2000 Ford Ranger.
1 thought on “2000 Ford Ranger Car Alarm Wire Chart”
Im trying to install an alarm on my 2000 ford ranger and im stuck on wiring the relays to the door locks. anyone?