MODIFIEDLIFE

1999 Jeep Grand Cherokee Alarm Wiring Chart

Modified Life is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn how it works.

1999 Jeep Grand Cherokee Alarm Wires

Find the right alarm wire colors, locations, and polarity with this 1999 Jeep Grand Cherokee alarm wiring diagram. This will help you install your car alarm wiring correctly.

Application Wire Color and Location
Battery Constant 12v+ Positive Wire (+) Pink/Black and Red
Battery Constant 12v+ Positive Wire Location Ignition Switch Harness
Starter Positive Wire (+) Yellow
Starter Positive Wire Location Ignition Switch Harness
Ignition Positive Wire (+) Dark Blue
Ignition Positive Wire Location Ignition Switch Harness
Accessory Positive Wire (+) Red/Black
Accessory Positive Wire Location Ignition Switch Harness
Secondary Accessory Positive Wire (+) Black/Orange
Secondary Accessory Positive Wire Location Ignition Switch Harness

1999 Jeep Grand Cherokee Alarm Sensor Wires

Find the right alarm sensor wire colors, locations, and polarity with this 1999 Jeep Grand Cherokee alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.

Application Wire Color and Location
Parking Light Negative Wire (-) Yellow (The yellow parking light wire will require a (-) negative through a 1300 ohm resistor and a extra relay.)
Parking Light Negative Wire Location At Headlight Switch, See Diagram
Parking Light Positive Wire (+) Do Not Use.
Parking Light Positive Wire Location N/A
Power Door Lock Negative Wire (-) Orange/Violet And Pink/Black (5 Wire Reverse Polarity). Use orange/violet for lock and pink/black for unlock at the drivers door switch. Use black/white for lock and pink/black for unlock at the passenger front door switch.
Power Door Lock Negative Wire Location In Both Front Doors, See Diagram
Power Door Unlock Negative Wire (-) Pink/Black (5 Wire Reverse Polarity). Use orange/violet for lock and pink/black for unlock at the drivers door switch. Use black/white for lock and pink/black for unlock at the passenger front door switch.
Power Door Unlock Negative Wire Location In Both Front Doors, See Diagram
Door Trigger Positive Wire (+) This vehicle has 4 door trigger input wires, the drivers door is a tan/red (-) at the drivers door lock switch, the passenger door is a tan/red (-) at the passenger door lock switch, the drivers rear door is a tan/orange (-) and the passenger rear door is a tan/yellow (-) both are at the BCM (body control module), when connecting to an alarm system you must both door trigger wires and diode isolate.
Door Trigger Positive Wire Location N/A
Dome Light Supervision Wire (-) Yellow/Dark Green
Dome Light Supervision Wire Location At BCM, Above Diagnostic Plug
Horn Negative Negative Wire (-) Gray/Orange
Horn Negative Negative Wire Location At Horn Switch
Tachometer Wire Negative Wire (-) On the 4.7L engine, go to any coil and use any wire that is not dark green/orange. On the 4.0L engine, use any wire with a tan stripe at the coil pack.
Tachometer Wire Negative Wire Location N/A
Brake Light Positive Wire (+) White/Tan (1999-1999) White/Tan or Purple/Brown (1999)
Brake Light Positive Wire Location At Switch Above Brake Pedal
Factory Alarm Disarm Wire (-) Light Green/Orange (To disarm the factory alarm system requires a (-) negative through a 463 ohm resistor and an extra relay.)
Factory Alarm Disarm Wire Location At Drivers Door Lock Switch In Drivers Door
Factory Anti-Theft Wire (-) Chrysler’s Sentry Key, A Transponder System
Factory Anti-Theft Wire Location Transponder At Ignition Switch Tumbler

Feel free to use any 1999 Jeep Grand Cherokee alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1999 Jeep Grand Cherokee car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1999 Jeep Grand Cherokee.

6 thoughts on “1999 Jeep Grand Cherokee Alarm Wiring Chart”

  1. James, as much as we would like to help you, not all car alarms are installed the same way. Different car alarm brands and different setups will call for different wiring. Our advice is to take your car to a qualified alarm installer and ask them to remove the alarm because it does take some wiring experience and alarm installation knowledge to know what to do. Hope this helps. Good luck on your 1999 Jeep Grand Cherokee car alarm removal.

  2. Alder, it is possible to add a shock sensor and motion sensor to your 1999 Jeep Grand Cherokee alarm. The only problem is not all car alarms are installed the same way. Different brands and different setups will call for different sensor wiring. Our advice is to take your car to a qualified alarm installer and ask them to install your sensors because it does take some wiring knowledge and experience to know what to do. Hope this helps. Good luck on your 1999 Jeep Grand Cherokee alarm troubleshooting.

  3. Alder Martinez

    My 1999 Jeep Grand Cherokee has the factory alarm and I want to know if it’s possible to install a shock sensor and motion sensor to the factory alarm and how? thanks.

  4. Barry, if you’re asking about bypassing the 1999 Jeep Grand Cherokee immobilizer for remote start then you will need a immobilizer bypass module:

    1999 Jeep Grand Cherokee Immobilizer Bypass Module (No Key Required)
    1999 Jeep Grand Cherokee Immobilizer Bypass Module (Requires Key and Programming)

    If you’re asking about removing or turning off your alarm, it would be hard to say because we don’t know what car alarm is installed in your 1999 Jeep Grand Cherokee. As much as we would like to help you, not all car alarms are installed the same way. Different brands and different setups will call for different wiring. Our advice is to take your car to a qualified alarm installer and ask them to remove the alarm because it does take some wiring knowledge and experience to know what to remove. Hope this helps. Good luck on your 1999 Jeep Grand Cherokee alarm removal.

Leave a Comment

Your email address will not be published. Required fields are marked *