1998 Chevrolet Malibu Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1998 Chevrolet Malibu alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant 12v+ Positive Wire (+) | Red (To gain access to the ignition switch harness it will be necessary to remove the radio. When doing so, do not unplug radio harness. All ignition wires must be tied into at the back of the ignition switch only.) |
| Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
| Starter Positive Wire (+) | Yellow (To gain access to the ignition switch harness it will be necessary to remove the radio. When doing so, do not unplug radio harness. All ignition wires must be tied into at the back of the ignition switch only.) |
| Starter Positive Wire Location | Ignition Switch Harness |
| Second Starter Positive Wire (+) | N/A |
| Second Starter Positive Wire Location | N/A |
| Ignition Positive Wire (+) | Pink (To gain access to the ignition switch harness it will be necessary to remove the radio. When doing so, do not unplug radio harness. All ignition wires must be tied into at the back of the ignition switch only.) |
| Ignition Positive Wire Location | Ignition Switch Harness |
| Second Ignition Positive Wire (+) | Green (To gain access to the ignition switch harness it will be necessary to remove the radio. When doing so, do not unplug radio harness. All ignition wires must be tied into at the back of the ignition switch only.) |
| Second Ignition Positive Wire Location | Ignition Switch Harness |
| Third Ignition Positive Wire (+) | N/A |
| Third Ignition Positive Wire Location | N/A |
| Accessory Positive Wire (+) | Orange (To gain access to the ignition switch harness it will be necessary to remove the radio. When doing so, do not unplug radio harness. All ignition wires must be tied into at the back of the ignition switch only.) |
| Accessory Positive Wire Location | Ignition Switch Harness |
| Second Accessory Positive Wire (+) | N/A |
| Second Accessory Positive Wire Location | N/A |
| Key Sense Wire | N/A |
| Key Sense Wire Location | N/A |
1998 Chevrolet Malibu Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1998 Chevrolet Malibu alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Parking Light Negative Wire (-) | White |
| Parking Light Negative Wire Location | At BCM Module. The BCM (body control module) is located behind the passengers side of dash. |
| Parking Light Positive Wire (+) | Brown |
| Parking Light Positive Wire Location | At Headlight Switch |
| Power Door Lock Positive Wire (+) | Light Blue |
| Power Door Lock Positive Wire Location | In Drivers Kick Panel |
| Power Door Unlock Positive Wire (+) | White |
| Power Door Unlock Positive Wire Location | In Drivers Kick Panel |
| Door Trigger Negative Wire (-) | Light Green/Black And Light Blue (Use Both). The light green/black (-) in the drivers kick panel is for the drivers door only. The light blue (-) located in the drivers running board harness heading under the drivers seat operates off of all other doors. When connecting to an alarm system use both wires and diode isolate. |
| Door Trigger Negative Wire Location | In Drivers Kick Panel |
| Dome Light Supervision Wire (-) | Light Green/Black (Requires Relay) |
| Dome Light Supervision Wire Location | In Drivers Kick Panel |
| Trunk Release Positive Wire (+) | Black (Requires Relay) |
| Trunk Release Positive Wire Location | At Trunk Release Switch |
| Sliding Power Door Wire | N/A |
| Sliding Power Door Wire Location | N/A |
| Horn Negative Wire (-) | Black |
| Horn Negative Wire Location | At Steering Column Harness |
| Tachometer Wire Negative Wire (-) | The tachometer wire is white on the 4-cylinder engine at the ignition coil and on the 6-cylinder engine it is a purple/white at the coil pack, located at the top rear of engine. |
| Tachometer Wire Negative Wire Location | N/A |
| Wait To Start Wire | N/A |
| Wait To Start Location | N/A |
| Brake Light Positive Wire (+) | Light Blue |
| Brake Light Positive Wire Location | At Switch Above Brake Pedal |
| Factory Alarm Disarm Wire (-) | N/A |
| Factory Alarm Disarm Wire Location | N/A |
| Factory Anti-Theft System | Yellow (+) And Black (-) And White (Not Used) |
| Factory Anti-Theft System Location | GM Passlock 2 System, Wires Are At The Top Of The Ignition Switch Tumbler |
Feel free to use any 1998 Chevrolet Malibu alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1998 Chevrolet Malibu car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1998 Chevrolet Malibu.