1997 Chevrolet Suburban Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1997 Chevrolet Suburban alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Red |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Purple or Yellow |
Starter Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Pink |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | Pink/White Or White (This wire must be connected as ignition #2 for remote starting.) |
Second Ignition Positive Wire Location | Ignition Switch Harness |
Accessory Positive Wire (+) | Orange |
Accessory Positive Wire Location | Ignition Switch Harness |
1997 Chevrolet Suburban Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1997 Chevrolet Suburban alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Positive Wire (+) | Brown |
Parking Light Positive Wire Location | At Headlight Switch Or In Drivers Kick Panel |
Power Door Lock Negative Wire (-) | Light Blue (Type A) |
Power Door Lock Negative Wire Location | In Either Door Harness |
Power Door Unlock Negative Wire (-) | White (Type A) |
Power Door Unlock Negative Wire Location | In Either Door Harness |
Door Trigger Negative Wire (-) | Purple |
Door Trigger Negative Wire Location | At Headlight Switch |
Dome Light Supervision Wire | White (-), Requires Relay |
Dome Light Supervision Wire Location | At Headlight Switch |
Trunk Release Negative Wire (-) | Black (+) Or Black/White (Requires Relay) |
Trunk Release Negative Wire Location | At Hatch Release Switch Or Low In Drivers Kick Panel |
Horn Negative Wire (-) | Black |
Horn Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | White |
Tachometer Wire Negative Wire Location | At ECM. The ECM (electronic control module) is located on the driver side inner fender. |
Wait To Start Wire | When hooking up a remote starter on a diesel, you will need to program in the 5, 10 or 15 second wait to start timer in the installation manual. On some vehicles the wait to start light on the dash is not a true (+) positive or (-) negative and the wire from the remote starter will not work. |
Wait To Start Location: | |
Brake Light Positive Wire (+) | White |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | N/A |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | N/A |
Factory Anti-Theft System Location | N/A |
Feel free to use any 1997 Chevrolet Suburban alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1997 Chevrolet Suburban car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1997 Chevrolet Suburban.
1 thought on “1997 Chevrolet Suburban Car Alarm Wiring Diagram”
hey yes so i recently changed the starter, changed the ignition switch, checked voltage to everything and that is fine but for some reason my 1997 chevrolet suburban still will not turn over what else could be wrong???