Whether your an expert Chevrolet Malibu car alarm installer, Chevrolet Malibu performance fan or a novice Chevrolet Malibu enthusiast with a 1997 Chevrolet Malibu, a Eagle Talon car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 1997 Chevrolet Malibu headlight bulb size you need for your low beam or high beam and save time. Also, find your other car light bulb sizes including your fog light, reverse light, turn signal, brake light and more. It’s that easy!
The Modified Life staff has taken all its Chevrolet Malibu car alarm wiring diagrams, Chevrolet Malibu car security wiring diagrams, Chevrolet Malibu car alarm wire diagrams, Chevrolet Malibu car security wiring schematics, Chevrolet Malibu car security diagrams, Chevrolet Malibu remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.
Feel free to use any Chevrolet Malibu auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided as-is without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 1997 Chevrolet Malibu.
Questions
If you have any questions pertaining to the car wiring in a 1997 Chevrolet Malibu, please feel free to post it at the bottom of this page and either we will do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.
Request a Car Alarm Wiring Diagram
If you can not find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we will do our best to find you the diagram, schematic or information you need for your mobile security installation.
Adding More Information
If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to post any additional car wiring information about the 1997 Chevrolet Malibu on this page.
1997 Chevrolet Malibu Car Alarm Wiring Guide
Battery Constant 12v+ Positive Wire (+): Red (To gain access to the ignition switch harness it will be necessary to remove the radio. When doing so, do not unplug radio harness. All ignition wires must be tied into at the back of the ignition switch only.)
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness
Starter Positive Wire (+): Yellow (To gain access to the ignition switch harness it will be necessary to remove the radio. When doing so, do not unplug radio harness. All ignition wires must be tied into at the back of the ignition switch only.)
Starter Positive Wire Location: Ignition Switch Harness
Second Starter Positive Wire (+): N/A
Second Starter Positive Wire Location: N/A
Ignition Positive Wire (+): Pink (To gain access to the ignition switch harness it will be necessary to remove the radio. When doing so, do not unplug radio harness. All ignition wires must be tied into at the back of the ignition switch only.)
Ignition Positive Wire Location: Ignition Switch Harness
Second Ignition Positive Wire (+): Green (To gain access to the ignition switch harness it will be necessary to remove the radio. When doing so, do not unplug radio harness. All ignition wires must be tied into at the back of the ignition switch only.)
Second Ignition Positive Wire Location: Ignition Switch Harness
Third Ignition Positive Wire (+): N/A
Third Ignition Positive Wire Location: N/A
Accessory Positive Wire (+): Orange (To gain access to the ignition switch harness it will be necessary to remove the radio. When doing so, do not unplug radio harness. All ignition wires must be tied into at the back of the ignition switch only.)
Accessory Positive Wire Location: Ignition Switch Harness
Second Accessory Positive Wire (+): N/A
Second Accessory Positive Wire Location: N/A
Key Sense Wire: N/A
Key Sense Wire Location: N/A
Parking Light Negative Wire (-): White
Parking Light Negative Wire Location: At BCM Module. The BCM (body control module) is located behind the passengers side of dash.
Parking Light Positive Wire (+): Brown
Parking Light Positive Wire Location: At Headlight Switch
Power Door Lock Positive Wire (+): Light Blue
Power Door Lock Positive Wire Location: In Drivers Kick Panel
Power Door Unlock Positive Wire (+): White
Power Door Unlock Positive Wire Location: In Drivers Kick Panel
Door Trigger Negative Wire (-): Light Green/Black And Light Blue (Use Both). The light green/black (-) in the drivers kick panel is for the drivers door only. The light blue (-) located in the drivers running board harness heading under the drivers seat operates off of all other doors. When connecting to an alarm system use both wires and diode isolate.
Door Trigger Negative Wire Location: In Drivers Kick Panel
Dome Light Supervision Wire (-): Light Green/Black (Requires Relay)
Dome Light Supervision Wire Location: In Drivers Kick Panel
Trunk Release Positive Wire (+): Black (Requires Relay)
Trunk Release Positive Wire Location: At Trunk Release Switch
Sliding Power Door Wire: N/A
Sliding Power Door Wire Location: N/A
Horn Negative Wire (-): Black
Horn Negative Wire Location: At Steering Column Harness
Tachometer Wire Negative Wire (-): The tachometer wire is white on the 4-cylinder engine at the ignition coil and on the 6-cylinder engine it is a purple/white at the coil pack, located at the top rear of engine.
Tachometer Wire Negative Wire Location: N/A
Wait To Start Wire: N/A
Wait To Start Location: N/A
Brake Light Positive Wire (+): Light Blue
Brake Light Positive Wire Location: At Switch Above Brake Pedal
Factory Alarm Disarm Wire (-): N/A
Factory Alarm Disarm Wire Location: N/A
Factory Anti-Theft System: Yellow (+) And Black (-) And White (Not Used)
Factory Anti-Theft System Location: GM Passlock 2 System, Wires Are At The Top Of The Ignition Switch Tumbler