1996 Chevrolet Blazer Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1996 Chevrolet Blazer alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Red |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Yellow Or Purple |
Starter Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Pink |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | Pink/White Or White (This Wire Must Be Connected As Ignition #2 For Remote Starting.) |
Second Ignition Positive Wire Location | Ignition Switch Harness |
Accessory Positive Wire (+) | Orange |
Accessory Positive Wire Location | Ignition Switch Harness |
1996 Chevrolet Blazer Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1996 Chevrolet Blazer alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Positive Wire (+) | Brown |
Parking Light Positive Wire Location | At Headlight Switch Or Harness Heading To Rear Of Vehicle |
Power Door Lock Positive Wire (+) | Light Blue |
Power Door Lock Positive Wire Location | In Either Kick Panel. If vehicle is equipped with a factory keyless entry system, the module is located on the removable black plastic panel under the drivers side dash, next to the parking brake pedal. This module (unit has TRW in the plastic) is black in color and has (2) plugs. (1) plug is blue and (1) plug is black, the door lock (light blue) and unlock (white) wires are in the blue plug. |
Power Door Unlock Positive Wire (+) | White |
Power Door Unlock Positive Wire Location | In Either Kick Panel. If vehicle is equipped with a factory keyless entry system, the module is located on the removable black plastic panel under the drivers side dash, next to the parking brake pedal. This module (unit has TRW in the plastic) is black in color and has (2) plugs. (1) plug is blue and (1) plug is black, the door lock (light blue) and unlock (white) wires are in the blue plug. |
Door Trigger Negative Wire (-) | White |
Door Trigger Negative Wire Location | At Under Dash Light |
Dome Light Supervision Wire | Use Door Trigger, Requires Relay |
Dome Light Supervision Wire Location | N/A |
Trunk Release Negative Wire (-) | Black/White (Requires Relay) |
Trunk Release Negative Wire Location | At Hatch/Glass Release Switch |
Sliding Power Door Wire (+) | Black/White |
Sliding Power Door Wire Location | At Switch On Dash |
Horn Negative Wire (-) | Black |
Horn Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | White |
Tachometer Wire Negative Wire Location | At Ignition Coil |
Brake Light Positive Wire (+) | White |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | N/A |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | N/A |
Factory Anti-Theft System Location | N/A |
Feel free to use any 1996 Chevrolet Blazer alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1996 Chevrolet Blazer car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1996 Chevrolet Blazer.
2 thoughts on “1996 Chevrolet Blazer Car Alarm Wiring Diagram”
Tony, the 1996 Chevrolet Blazer does not have a vehicle immobilizer. Hope this helps. Good luck with your 1996 Chevrolet Blazer alarm install.
does the 96 Chevrolet Blazer have an anti theft system to keep it from stating with no chip in the key?