1993 Nissan Sentra Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1993 Nissan Sentra alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant 12v+ Positive Wire (+) | White |
| Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
| Starter Positive Wire (+) | Black/White (When installing a remote starter, you must use both starter #1 and starter #2 wires. Both wires must be connected to the starter/cranking output wire from the remote starter or the vehicle will not remote start when the engine is cold.) |
| Starter Positive Wire Location | Ignition Switch Harness |
| Second Starter Positive Wire (+) | Black/Yellow (When installing a remote starter, you must use both starter #1 and starter #2 wires. Both wires must be connected to the starter/cranking output wire from the remote starter or the vehicle will not remote start when the engine is cold.) |
| Second Starter Positive Wire Location | Ignition Switch Harness |
| Ignition Positive Wire (+) | Black/Red |
| Ignition Positive Wire Location | Ignition Switch Harness |
| Accessory Positive Wire (+) | White/Blue |
| Accessory Positive Wire Location | Ignition Switch Harness |
1993 Nissan Sentra Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1993 Nissan Sentra alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Parking Light Positive Wire (+) | Red/Blue |
| Parking Light Positive Wire Location | In Plug Above Drivers Kick Panel |
| Power Door Lock Negative Wire (-) | Light Green/Black (Type F). The door locking system on this vehicle is a (type f) and will require an extra relay. |
| Power Door Lock Negative Wire Location | At Switch In Door |
| Power Door Unlock Negative Wire (-) | Same Wire as Above |
| Power Door Unlock Negative Wire Location | N/A |
| Door Trigger Negative Wire (-) | Red/White |
| Door Trigger Negative Wire Location | In Yellow Plug, Above Drivers Kick Panel |
| Dome Light Supervision Wire | Use Door Trigger (Requires Relay) |
| Dome Light Supervision Wire Location: | N/A |
| Horn Negative Negative Wire (-) | Green/White |
| Horn Negative Negative Wire Location | At Steering Column Harness |
| Tachometer Wire Negative Wire (-) | Green/Yellow or Blue/Black |
| Tachometer Wire Negative Wire Location | At Ignition Coil |
| Brake Light Positive Wire (+) | Red/Green |
| Brake Light Positive Wire Location | At Switch Above Brake Pedal |
| Factory Anti-Theft System | N/A |
Feel free to use any 1993 Nissan Sentra alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1993 Nissan Sentra car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1993 Nissan Sentra.
2 thoughts on “1993 Nissan Sentra Car Alarm Wire Chart”
Navin, not all car alarms are installed the same way. Different brands and different setups will call for different wiring. Our advice is to take your car to a qualified alarm installer and ask them to remove the alarm because it does take some wiring knowledge and experience to know what to remove. Hope this helps. Good luck.
hey i have a 1993 nissan sentra 1.6 dohc and it had an alarm system that was removed (by previous owner)and the valet switch is broken and it wont allow me to start the car at all…is there any wire that i can use to completely remove this allowing me to start the car with the ignition?please help…thanks