1992 Chevrolet Suburban Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1992 Chevrolet Suburban alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Red |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Purple (+) Or Yellow |
Starter Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Pink |
Ignition Positive Wire Location | Ignition Switch Harness |
Accessory Positive Wire (+) | Orange |
Accessory Positive Wire Location | Ignition Switch Harness |
1992 Chevrolet Suburban Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1992 Chevrolet Suburban alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Positive Wire (+) | Brown |
Parking Light Positive Wire Location | At Headlight Switch |
Power Door Lock Positive Wire (+) | Light Blue |
Power Door Lock Positive Wire Location | In Either Door Boot |
Power Door Unlock Positive Wire (+) | Black/Red |
Power Door Unlock Positive Wire Location | In Either Door Boot |
Door Trigger Negative Wire (-) | White |
Door Trigger Negative Wire Location | At Headlight Switch |
Dome Light Supervision Wire | Use Door Trigger (Requires Relay) |
Dome Light Supervision Wire Location | N/A |
Trunk Release Negative Wire (+) | Black (Requires Relay) |
Trunk Release Negative Wire Location | At Hatch Release Switch |
Horn Negative Wire (-) | Black |
Horn Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | Purple/White (For diesel tachometer wire use the white wire at the alternator or instrument cluster.) |
Tachometer Wire Negative Wire Location | At ECM. The ECM (electronic control module) is located behind the glovebox, and to the right. |
Wait To Start Light Positive Wire (+) | Dark Blue (When hooking up a remote starter on a diesel, if the wait to start wire from the remote starter does not wait until the light on the dash turn out before cranking, you will need to program in the 5, 10 or 15 second wait to start timer in the installation manual. On some vehicles, the wait to start light on the dash is not a true (+)positive or (-) negative and the wire from the remote starter will not work. When this wait to start timer is programmed, disconnect and tape up the wait to start wire from the remote starter that is tied into the wait to start light on the dash.) |
Wait To Start Light Positive Wire Location | At Instrument Cluster |
Brake Light Positive Wire (+) | White |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | N/A |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | N/A |
Factory Anti-Theft System Location | N/A |
Feel free to use any 1992 Chevrolet Suburban alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1992 Chevrolet Suburban car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1992 Chevrolet Suburban.