MODIFIEDLIFE

1990 Chevrolet Corvette Auto Security Wiring Guide

Modified Life is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn how it works.


Whether your an expert Chevrolet Corvette car alarm installer, Chevrolet Corvette performance fan or a novice Chevrolet Corvette enthusiast with a 1990 Chevrolet Corvette, a Eagle Talon car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 1990 Chevrolet Corvette headlight bulb size you need for your low beam or high beam and save time. Also, find your other car light bulb sizes including your fog light, reverse light, turn signal, brake light and more. It’s that easy!

The Modified Life staff has taken all its Chevrolet Corvette car alarm wiring diagrams, Chevrolet Corvette car security wiring diagrams, Chevrolet Corvette car alarm wire diagrams, Chevrolet Corvette car security wiring schematics, Chevrolet Corvette car security diagrams, Chevrolet Corvette remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.

Feel free to use any Chevrolet Corvette auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided as-is without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 1990 Chevrolet Corvette.

Questions

If you have any questions pertaining to the car wiring in a 1990 Chevrolet Corvette, please feel free to post it at the bottom of this page and either we will do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.

Request a Car Alarm Wiring Diagram

If you can not find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we will do our best to find you the diagram, schematic or information you need for your mobile security installation.

Adding More Information

If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to post any additional car wiring information about the 1990 Chevrolet Corvette on this page.

1990 Chevrolet Corvette Auto Security Installation Guide

Battery Constant 12v+ Positive Wire (+): Red
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness

Starter Positive Wire (+): Yellow
Starter Positive Wire Location: Ignition Switch Harness

Ignition Positive Wire (+): Pink
Ignition Positive Wire Location: Ignition Switch Harness

Accessory Positive Wire (+): Orange
Accessory Positive Wire Location: Ignition Switch Harness

Parking Light Positive Wire (+): Brown
Parking Light Positive Wire Location: At Headlight Switch

Power Door Lock Negative Wire (-): Light Blue (5 Wire Reverse Polarity). This is a type “c” door locking system, the passenger switch is the master switch for testing.
Power Door Lock Negative Wire Location: In Either Kick Panel

Power Door Unlock Negative Wire (-): Black (5 Wire Reverse Polarity). This is a type “c” door locking system, the passenger switch is the master switch for testing.
Power Door Unlock Negative Wire Location: In Either Kick Panel

Door Trigger Negative Wire (-): Black/White And Black/Yellow (Use Both). The black/white (-) is for the drivers door and the black/yellow (-) is for the passenger door, use both and diode isolate when connecting to an alarm system.
Door Trigger Negative Wire Location: In Each Kick Panel

Dome Light Supervision Wire (-): White (Requires Relay)
Dome Light Supervision Wire Location: At Under Dash Light

Trunk Release Negative Wire (-): Brown (Requires Relay)
Trunk Release Negative Wire Location: At Hatch Release Switch

Horn Negative Wire (-): Black
Horn Negative Wire Location: At Steering Column Harness

Tachometer Wire Negative Wire (-): White Or Purple/White
Tachometer Wire Negative Wire Location: At Ignition Coil

Brake Light Positive Wire (+): White Or Light Blue
Brake Light Positive Wire Location: At Switch Above Brake Pedal

Factory Alarm Disarm Wire (-): Light Green
Factory Alarm Disarm Wire Location: In Either Kick Panel

Factory Anti-Theft System: The VATS (vehicle anti-theft system) wire may be (2) thin yellow wires, (2) thin tan wires or (2) thin white wires, these wires are usually in a orange or black heat shrink tube, but at times are left out of the tube and ran by themselves up under the dash to the security module under the dash.
Factory Anti-Theft System Location: GM Vats System At Ignition Switch

Leave a Comment

Your email address will not be published. Required fields are marked *