Car Stereo Radio Wiring Diagram – 1995 Ford Mustang

Whether your an expert installer or a novice enthusiast with a 1995 Ford Mustang, an automotive wiring diagram can save yourself time and headaches. One of the most time consuming tasks with installing a car stereo, car radio, car speakers, car amplifier, car navigation or any mobile electronics is identifying the correct wires for a 1995 Ford Mustang.

The Modified Life staff has put their heads together to create an invaluable resource containing car stereo wiring diagram, car wiring diagram and radio wiring diagram. Feel free to use any car stereo wiring diagram that is listed on Modified Life but keep in mind that all information here is provided “as is” without any warranty of any kind. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 1995 Ford Mustang.

If you can’t find your car radio or stereo wire diagram on Modified Life, please feel free to post a car wiring diagram request at the bottom of this page and we’ll do our best to find you the information you need for your mobile installation.

Radio Constant 12V+ Wire: Green/Yellow
Radio Switched 12V+ Wire: Yellow/Black
Radio Ground Wire: Black/Green
Radio Illumination Wire: Light Blue/Red
Radio Dimmer Wire: n/a
Radio Antenna Trigger Wire: Blue
Radio Amp Trigger Wire: Blue (Same as Antenna Trigger)
Front Speakers Size and Location: 5″ x 7″ Doors
Left Front Speaker Wire (+): Orange/Light Green
Left Front Speaker Wire (-): Light Blue/White
Right Front Speaker Wire (+): White/Light Green
Right Front Speaker Wire (-): Dark Green/Orange
Rear Speakers SIze and Location: 5″ x 7″ Rear Deck
Left Rear Speaker Wire (+): Gray/Light Blue
Left Rear Speaker Wire (-): Tan/Yellow
Right Rear Speaker Wire (+): Orange/Red
Right Rear Speaker Wire (-): Brown/Pink

Make Your Ford Mustang Car Stereo Installation Easy with these Products

5 Comments

  • Reply Alejandro Lopez March 15, 2008 at 11:48 pm

    do you have any information of the wire diagram for a 1995 mustang with mach 400 sound system? I trying to activate the amps. thank you for you comment and help. Alejandro

  • Reply Ron Henry April 19, 2009 at 12:20 pm

    Thank You Thank You Thank You You just made installing a radio in my daughters new (used) car so much easier as the idiot who had it previously had cut the connectors off.

  • Reply ModifiedLife April 27, 2009 at 5:05 pm

    Ron Henry, we’re glad we could help you with your car stereo wiring diagram needs.

  • Reply Shane July 23, 2011 at 6:35 pm

    i justed installed a dual radio in my 1995 mustang. i bought the wire harness and i dont have any sound. i know the wires are connected correctly. what else could it be?

  • Reply ModifiedLife July 27, 2011 at 2:22 am

    Shane, first double check ALL your fuses and make sure ALL your fuses are good. You can do this by using an Automotive Fuse Tester and making sure all of your fuses are not blown. If all of your fuses are good, your 1995 Ford Mustang may have a factory amp that needs to be turned on by your after market radio. The car radio amplifier trigger wire has to be wired up to turn on your factory amplifier to output sound from your speakers. Double check that your 1995 Ford Mustang amp turn on wire is connected. Hope this helps. Good luck with your 1995 Ford Mustang stereo installation.

  • Leave a Reply

    17 − 4 =