Whether your an expert installer or a novice enthusiast with a 1993 Honda Accord, an automotive wiring diagram can save yourself time and headaches. One of the most time consuming tasks with installing a car alarm, remote car starter, car security system or any mobile electronics is identifying the correct wires for a 1993 Honda Accord.
The Modified Life staff has put their heads together to create an invaluable resource containing car alarm wiring diagram, remote car starter wiring diagram, car wiring diagram and car security wiring diagram. Feel free to use any car alarm wiring diagram or remote car starter wiring diagram that is listed on Modified Life but keep in mind that all information here is provided “as is” without any warranty of any kind. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 1993 Honda Accord.
1993 Honda Accord Car Alarm and Remote Car Starter Wiring Information
Constant 12V+ Wire: White
Constant 12V+ Wire Location: Ignition Switch Harness
Starter Wire (+): Black/White
Starter Wire Location: Ignition Switch Harness
Ignition Wire (+): Black/Yellow
Ignition Wire Location: Ignition Switch Harness
2nd Ignition Wire: N/A
2nd Ignition Wire Location: N/A
Accessory Wire: Yellow
Accessory Wire Location: Ignition Switch Harness
Door Lock Wire (-): Black/White
Door Lock Wire Location: Driver Kick Panel
Door Unlock Wire (-): Black/Red
Door Unlock Wire Location: Driver Kick Panel
Door Trigger Wire (-): Black/White
Door Trigger Wire Location: Brown Plug Left of Steering Column
Dome Supervision Wire: Use Door Trigger
Dome Supervision Wire Location: None
Tachometer Wire: Blue
Tachometer Wire Location: Distributor
Headlights Wire (-): N/A
Headlights Wire Location: N/A
Parklight Positive Wire (+): Red/Black
Parklight Positive Wire Location: Fuse Panel by Driver Kick Panel
Parklight Negative Wire: N/A
Parklight Negative Wire Location: N/A
Trunk/Hatch Pin Wire (-): N/A
Trunk/Hatch Pin Wire Location: N/A
Hood Pin Wire (-): N/A
Hood Pin Wire Location: N/A
Trunk/Hatch Release Wire (+): N/A
Trunk/Hatch Release Wire Location: N/A
Factory Alarm Arm Wire: N/A
Factory Alarm Arm Wire Location: N/A
Factory Alarm Disarm Wire (-): N/A
Factory Alarm Disarm Wire Location: N/A
Horn Wire (-): Light Green/Blue
Horn Wire Location: Steering Column Harness
Brake Wire (+): Green/White
Brake Wire Location: Brake Pedal Switch
this page was extremly helpful in so many ways, i wanna say thanx to who ever thought of doing this page… i wanted know if you knew which wire would trigger the alarm if the trunk were to be opened??? any feed back would be greatly appreciated…
Recaiba, if your trunk has a courtesy light, you can simply use one of the two wires going to the trunk light as your trunk trigger. If you don’t have a trunk light, you would need to put in a trigger. Hope this helps. Good luck.