2013 Ford Expedition Alarm Install Instructions

Whether your an expert Ford Expedition car alarm installer, Ford Expedition performance fan or a novice Ford Expedition enthusiast, a 2013 Ford Expedition alarm install instructions can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 2013 Ford Expedition.

The Modified Life staff has taken all its Ford Expedition car alarm wiring diagrams, Ford Expedition car security wiring diagrams, Ford Expedition car alarm wire diagrams, Ford Expedition car security wiring schematics, Ford Expedition car security diagrams, Ford Expedition remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.

Feel free to use any Ford Expedition auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided as-is without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 2013 Ford Expedition.

Questions

If you have any questions pertaining to the 2013 Ford Expedition alarm install instructions, please feel free to post it at the bottom of this page and either we will do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.

Request a Car Alarm Wiring Diagram

If you can not find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we will do our best to find you the diagram, schematic or information you need for your mobile security installation.

Adding More Information

If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to add more information to our 2013 Ford Expedition alarm install instructions on this page.

2013 Ford Expedition Alarm Install Instructions

Battery Constant 12v+ Positive Wire (+): Red
Battery Constant 12v+ Positive Wire Location: At Smart Junction Box in Passenger Kick Panel (Black, 1-Pin Plug, Pin 1)

Starter Positive Wire (+): Blue/White
Starter Positive Wire Location: At Ignition Switch (Gray, 10-Pin Plug, Pin 10)

Second Starter Positive Wire (+): N/A
Second Starter Positive Wire Location: N/A

Ignition Positive Wire (+): Red
Ignition Positive Wire Location: At Dash Fuse Box (White, 40-Pin Plug, Pin 22)

Second Ignition Positive Wire (+): N/A
Second Ignition Positive Wire Location: N/A

Third Ignition Positive Wire (+): N/A
Third Ignition Positive Wire Location: N/A

Accessory Positive Wire (+): Brown/Yellow
Accessory Positive Wire Location: At Ignition Switch (Gray, 10-Pin Plug, Pin 7)

Second Accessory Positive Wire (+): Purple/Green
Second Accessory Positive Wire Location: At Ignition Switch (Gray, 10-Pin Plug, Pin 5)

Key Sense Wire: N/A
Key Sense Wire Location: N/A

Parking Light Negative Wire (-): Green/Orange
Parking Light Negative Wire Location: At Smart Junction Box in Passenger Kick Panel (Black, 52-Pin Plug, Pin 48)

Parking Light Positive Wire (+): Purple/White
Parking Light Positive Wire Location: At Smart Junction Box in Passenger Kick Panel (Gray, 13-Pin Plug, Pin 6)

Power Door Lock Negative Wire (-): White/Brown
Power Door Lock Negative Wire Location: At Smart Junction Box in Passenger Kick Panel (Gray, 26-Pin Plug, Pin 17)

Power Door Unlock Negative Wire (-): Blue/Brown
Power Door Unlock Location: At Smart Junction Box in Passenger Kick Panel (Gray, 26-Pin Plug, Pin 4)

Door Trigger Positive Wire (+): Gray/Purple
Door Trigger Positive Wire Location: At Dome Light

Dome Light Supervision Wire (+): Gray/Purple
Dome Light Supervision Wire Location: At Smart Junction Box in Passenger Kick Panel (Gray, 14-Pin Plug, Pin 9)

Trunk Release Negative Wire (-): Brown
Trunk Release Negative Wire Location: At Smart Junction Box in Passenger Kick Panel (Gray, 26-Pin Plug, Pin 7 (liftgate) and Pin 20 (glass))

Sliding Power Door Wire: N/A
Sliding Power Door Wire Location: N/A

Horn Negative Wire (-): Yellow/Red
Horn Negative Wire Location: At Smart Junction Box in Passenger Kick Panel (Black, 52-Pin Plug, Pin 41)

Tachometer Wire Negative Wire (-): Any Wire Not Blue
Tachometer Wire Negative Wire Location: At Fuel Injector

Wait To Start Wire: N/A
Wait To Start Location: N/A

Brake Light Positive Wire (+): Yellow/Gray
Brake Light Positive Wire Location: At Brake Switch

Factory Alarm Disarm Wire (-): N/A
Factory Alarm Disarm Wire Location: N/A

Factory Anti-Theft System: Ford Transponder Anti Theft System
Factory Anti-Theft System Location: Requires Bypass Module

The 2013 Ford Expedition alarm wire color and location information above is updated as it is submitted by the Modified Life community.


Make Your Car Alarm Installation Easy with these Tools and Accessories

No Comments

Leave a Reply

five + four =