2010 Chevrolet Aveo Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2010 Chevrolet Aveo alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant 12v+ Positive Wire (+) | Red/Black |
| Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
| Ignition Positive Wire (+) | Orange |
| Ignition Positive Wire Location | Ignition Switch Harness |
| Second Ignition Positive Wire (+) | N/A |
| Second Ignition Positive Wire Location | N/A |
| Third Ignition Positive Wire (+) | N/A |
| Third Ignition Positive Wire Location | N/A |
| Accessory Positive Wire (+) | Green |
| Accessory Positive Wire Location | Ignition Switch Harness |
| Second Accessory Positive Wire (+) | Red/Black (Same as Starter 2 Wire) |
| Second Accessory Positive Wire Location | Ignition Switch Harness |
| Starter Positive Wire (+) | Yellow (Do Not Use for Remote Start) |
| Starter Positive Wire Location | Pin #36 in 40-Pin Gray Plug at Fuse Box Under the Hood |
| Second Starter Positive Wire (+) | Red/Black (1.3K Ohms Needed) |
| Second Starter Positive Wire Location | Ignition Switch Harness |
| Key Sense Wire | Light Green |
| Key Sense Wire Location | Ignition Switch Harness |
2010 Chevrolet Aveo Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2010 Chevrolet Aveo alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Parking Light Negative Wire (-) | Light Blue |
| Parking Light Negative Wire Location | Pin #6 in 6-Pin Harness at Vehicle Light Switch |
| Parking Light Positive Wire (+) | N/A |
| Parking Light Positive Wire Location | N/A |
| Power Door Lock Negative Wire (-) | Light Blue |
| Power Door Lock Negative Wire Location | Pin #6 in 24-Pin White Connector in Drivers Kick Panel |
| Power Door Unlock Negative Wire (-) | White |
| Power Door Unlock Negative Wire Location | Pin #5 in 24-Pin White Connector in Drivers Kick Panel |
| Door Trigger Positive Wire (-) | Violet (Left) and White (Right) |
| Door Trigger Positive Wire Location | Pin #4 in 24-Pin White Plug in Driver Kick Panel (Left) and Pin #14 in 24-Pin White Plug in Driver Kick Panel (Left) |
| Dome Light Supervision Wire (-) | Use Door Trigger Wire |
| Dome Light Supervision Wire Location | In Harness in Driver Kick Panel |
| Trunk Release Negative Wire (-) | Orange/Black |
| Trunk Release Negative Wire Location | Pin #5 in 24-Pin White Plug in Driver Kick Panel |
| Sliding Power Door Wire | N/A |
| Sliding Power Door Wire Location | N/A |
| Horn Negative Wire (-) | Dark Green |
| Horn Negative Wire Location | In Harness in Driver Kick Panel |
| Tachometer Wire Wire (-) | Any Uncommon Color Wire |
| Tachometer Wire Wire Location | At Any Fuel Injector |
| Wait To Start Wire | N/A |
| Wait To Start Location | N/A |
| Brake Light Positive Wire (+) | Light Blue |
| Brake Light Positive Wire Location | At Brake Switch Above Brake Pedal |
| Factory Alarm Disarm Wire (-) | Brown/Black |
| Factory Alarm Disarm Wire Location | Pin #3 in 24-Pin White Plug in Driver Kick Panel |
| Factory Anti-Theft System | RF Activated Immobilizer System |
| Factory Anti-Theft System Location | Key Sends a Signal to the BCM Module |
Feel free to use any 2010 Chevrolet Aveo alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2010 Chevrolet Aveo car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2010 Chevrolet Aveo.