2009 Jeep Liberty Car Stereo Install Instructions

Whether your an expert Jeep Liberty mobile electronics installer, Jeep Liberty fanatic, or a novice Jeep Liberty enthusiast with a 2009 Jeep Liberty, a car stereo wiring diagram can save yourself a lot of time. Automotive wiring in a 2009 Jeep Liberty vehicles are becoming increasing more difficult to identify due to the installation of more advanced factory oem electronics.

One of the most time consuming tasks with installing an after market car stereo, car radio, satellite radio, xm radio, car speakers, tweeters, car subwoofer, crossovers, audio equalizer, car amplifier, mobile amp, car amplifier, mp3 player, ipod or any car audio electronics is identifying the correct color car audio wires for your 2009 Jeep Liberty.

The Modified Life staff has taken all its Jeep Liberty car radio wiring diagrams, Jeep Liberty car audio wiring diagrams, Jeep Liberty car stereo wiring diagrams, Jeep Liberty car radio wiring schematics, Jeep Liberty car wiring diagrams and cataloged them online for use by our visitors for free. Our automotive wiring diagrams allow you to enjoy your new mobile electronics rather than spend countless hours trying to figure out which wires goes to which 2009 Jeep Liberty part or component.

Feel free to use any Jeep Liberty car stereo wiring diagram that is listed on Modified Life but keep in mind that all information here is provided “as is” without any warranty of any kind and most of the car audio wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the Jeep Liberty wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 2009 Jeep Liberty.

Questions

If you have any questions pertaining to the audio system in the 2009 Jeep Liberty, please feel free to post it at the bottom of this page and either we’ll do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you’re looking for.

Request a Car Stereo Wiring Diagram

If you can’t find a particular car audio wire diagram on Modified Life, please feel free to post a car radio wiring diagram request at the bottom of this page and we’ll do our best to find you the diagram or schematic you need for your mobile audio installation.

Adding More Information

If you would like to help the Modified Life community by adding any missing information or adding a new car audio wire diagram to our resource, please feel free to post it at the bottom of this page.

2009 Jeep Liberty Car Stereo Install Instructions

Car Radio Battery Constant 12v+ Wire: Red
Car Radio Accessory Switched 12v+ Wire: Run a wire to the steering column and use the violet/brown wire in the ignition switch harness.
Car Radio Ground Wire: Black/White
Car Radio Illumination Wire: N/A
Car Stereo Dimmer Wire: N/A
Car Stereo Power Antenna Trigger Wire: Gray/Orange
Car Stereo Amp Turn-On Trigger Wire: N/A
Car Stereo Amplifier Location: N/A

Car Audio Front Tweeter Size: 1″ Tweeters
Car Audio Front Tweeter Depth: 1″
Car Audio Front Tweeter Location: N/A

Left Front Speaker Positive Wire (+): Gray/Light Green
Left Front Speaker Negative Wire (-): Gray/Dark Green
Right Front Speaker Positive Wire (+): Dark Green/Light Green
Right Front Speaker Negative Wire (-): Dark Green/Gray

Car Audio Front Speakers Size: 6″ x 9″ Speakers
Car Audio Front Speakers Depth: 2 1/2″
Car Audio Front Speakers Location: N/A

Left Rear Speaker Positive Wire (+): N/A
Left Rear Speaker Negative Wire (-): N/A
Right Rear Speaker Positive Wire (+): N/A
Right Rear Speaker Negative Wire (-): N/A

Car Audio Rear Speakers Size: 6″ x 9″ Speakers
Car Audio Rear Speakers Depth: 3″
Car Audio Rear Speakers Location: N/A

Car Subwoofer Speaker Size: N/A
Car Subwoofer Speaker Depth: N/A
Car Subwoofer Speaker Location: N/A
Car Subwoofer Speaker Positive Wire (+): N/A
Car Subwoofer Speaker Negative Wire (-): N/A

The 2009 Jeep Liberty radio wire color information above is updated as it is submitted by the Modified Life community.

Make Your Jeep Liberty Car Stereo Installation Easy with these Products

2 Comments

  • Reply Cole September 10, 2011 at 2:13 pm

    I wired a LOC onto a 2009 Jeep Liberty via the Front R/L speakers @ the back of the FACTORY radio. Now.. The volume of the front speakers are much lower than before @ the same volume level. Example: “When the stereo is on 10 volume before it was comfortably loud, now it’s very quiet. Another problem I’m having is that the subwoofer hits the same @ 1 volume as it does at 20… I’m not sure what the problem is, but I’m assuming it has to do with the factory amps in this jeep. It is a Premium model jeep and has an infinity sub in the back. The Jeep is not mine and I only have access to it for short periods of time. Please let me know something! Also.. There might be a violet/brown wire in YOUR steering wire harness… However, in the one I operated on; no such color combination exists. Thank You.

  • Reply ModifiedLife September 14, 2011 at 4:13 pm

    Cole, when splicing in the RCA Line Out Converter, tap your factory rear speaker wires (at the speaker) to get a full range audio source. We suggest you invest in some solid wire taps that wont come loose. These wire tap connectors will allow you to tap into wires without cutting and installs in seconds by hand with no crimping or tools required. If you install a line out converter, your rear speakers will still work properly. If you’ve never installed car audio before, we advise you to take your car to an experienced mobile audio installer. Hope this helps. Good luck with your 2009 Jeep Liberty amplifier installation.

  • Leave a Reply

    one × four =