2009 GMC Canyon Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2009 GMC Canyon alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | White/Black |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | N/A |
Starter Positive Wire Location | N/A |
Second Starter Positive Wire (+) | N/A |
Second Starter Positive Wire Location | N/A |
Ignition Positive Wire (+) | White/Green |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | N/A |
Second Ignition Positive Wire Location | N/A |
Third Ignition Positive Wire (+) | N/A |
Third Ignition Positive Wire Location | N/A |
Accessory Positive Wire (+) | White/Red |
Accessory Positive Wire Location | Ignition Switch Harness |
Second Accessory Positive Wire (+) | N/A |
Second Accessory Positive Wire Location | N/A |
Key Sense Wire | N/A |
Key Sense Wire Location | N/A |
2009 GMC Canyon Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2009 GMC Canyon alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | Brown/White |
Parking Light Negative Wire Location | At Vehicle Light Switch Harness |
Parking Light Positive Wire (+) | N/A |
Parking Light Positive Wire Location | N/A |
Power Door Lock Negative Wire (-) | Light Blue |
Power Door Lock Negative Wire Location | Pin #6 in Black Plug at BCM Module in Passenger Kick Panel |
Power Door Unlock Negative Wire (-) | Dark Blue |
Power Door Unlock Negative Wire Location | Pin #7 in Black Plug at BCM Module in Passenger Kick Panel |
Door Trigger Negative Wire (-) | White |
Door Trigger Negative Wire Location | Pin #46 in Plug A at BCM Module in Passenger Kick Panel |
Dome Light Supervision Wire (-) | White |
Dome Light Supervision Wire Location | Pin #46 in Plug A at BCM Module in Passenger Kick Panel |
Trunk Release Negative Wire (-) | N/A |
Trunk Release Negative Wire Location | N/A |
Sliding Power Door Wire | N/A |
Sliding Power Door Wire Location | N/A |
Horn Negative Wire (-) | Black |
Horn Negative Wire Location | In Harness at Steering Column Harness |
Tachometer Wire Negative Wire (-) | N/A |
Tachometer Wire Negative Wire Location | N/A |
Wait To Start Wire | N/A |
Wait To Start Location | N/A |
Brake Light Positive Wire (+) | Light Blue |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | N/A |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | GM Passlock II Immobilizer System |
Factory Anti-Theft System Location | Key Sends a RF Signal to the BCM Module |
Feel free to use any 2009 GMC Canyon alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2009 GMC Canyon car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2009 GMC Canyon.