MODIFIEDLIFE

2008 Buick Enclave Car Alarm Wiring Diagram


Whether your an expert Buick Enclave car alarm installer, Buick Enclave performance fan or a novice Buick Enclave enthusiast with a 2008 Buick Enclave, a 2008 Buick Enclave car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 2008 Buick Enclave headlight bulb size you need for your low beam or high beam and save time. Also, find your other car light bulb sizes including your fog light, reverse light, turn signal, brake light and more. It’s that easy!

The Modified Life staff has taken all its Buick Enclave car alarm wiring diagrams, Buick Enclave car security wiring diagrams, Buick Enclave car alarm wire diagrams, Buick Enclave car security wiring schematics, Buick Enclave car security diagrams, Buick Enclave remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.

Feel free to use any Buick Enclave auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided as-is without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 2008 Buick Enclave.

Questions

If you have any questions pertaining to the car wiring in a 2008 Buick Enclave, please feel free to post it at the bottom of this page and either we will do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.

Request a Car Alarm Wiring Diagram

If you can not find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we will do our best to find you the diagram, schematic or information you need for your mobile security installation.

Adding More Information

If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to post any additional car wiring information about the 2008 Buick Enclave on this page.

2008 Buick Enclave Car Alarm Wiring Diagram

Battery Constant 12v+ Positive Wire (+): Red/White
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness

Starter Positive Wire (+): Yellow (Not Used For Remote Start). This vehicle has a special ignition that requires a bypass module.
Starter Positive Wire Location: N/A

Second Starter Positive Wire (+): N/A
Second Starter Positive Wire Location: N/A

Ignition Positive Wire (+): Pink
Ignition Positive Wire Location: Ignition Switch Harness

Second Ignition Positive Wire (+): N/A
Second Ignition Positive Wire Location: N/A

Third Ignition Positive Wire (+): N/A
Third Ignition Positive Wire Location: N/A

Accessory Positive Wire (+): Brown
Accessory Positive Wire Location: Ignition Switch Harness

Second Accessory Positive Wire (+): N/A
Second Accessory Positive Wire Location: N/A

Key Sense Wire: N/A
Key Sense Wire Location: N/A

Parking Light Negative Wire (-): Brown/White (The BCM is located to the left of the steering column.)
Parking Light Negative Wire Location: At BCM

Parking Light Positive Wire (+): Purple And Brown/White
Parking Light Positive Wire Location: Low In Drivers Kick Panel

Power Door Lock Negative Wire (-): This vehicle has a multi-plex door lock system and requires a bypass for keyless entry.
Power Door Lock Negative Wire Location:

Power Door Unlock Negative Wire (-): This vehicle has a multi-plex door lock system and requires a bypass for keyless entry.
Power Door Unlock Negative Wire Location:

Door Trigger Negative Wire (-): The left front door is gray/black (-) at door module inside the driver side door. The right front door is tan/white (-) at door module inside passenger door. The left rear door is light blue/black (-) at pink plug at BCM. The right rear door is light green/black (-) at pink plug at BCM. Use all 4 wires and diode isolate each wire.
Door Trigger Negative Wire Location:

Dome Light Supervision Wire (+): Gray/Black
Dome Light Supervision Wire Location: At BCM

Trunk Release Negative Wire (-): Gray
Trunk Release Negative Wire Location: At BCM

Sliding Power Door Wire: N/A
Sliding Power Door Wire Location: N/A

Horn Negative Wire (-): Tan
Horn Negative Wire Location: At Steering Column Harness

Tachometer Wire Negative Wire (-): Not Pink/Black
Tachometer Wire Negative Wire Location: At Fuel Injector

Wait To Start Wire: N/A
Wait To Start Location: N/A

Brake Light Positive Wire (+): Light Blue
Brake Light Positive Wire Location: At Switch Above Brake Pedal

Factory Alarm Disarm Wire (-): Light Green
Factory Alarm Disarm Wire Location: At BCM

Factory Anti-Theft System: Transponder Anti-Theft
Factory Anti-Theft System Location: Transponder At Ignition Switch Tumbler

The 2008 Buick Enclave alarm wire color information above is updated as it is submitted by the Modified Life community.

1 thought on “2008 Buick Enclave Car Alarm Wiring Diagram”

Leave a Comment

Your email address will not be published. Required fields are marked *