2007 GMC Canyon Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2007 GMC Canyon alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Connect To Battery Only |
Battery Constant 12v+ Positive Wire Location | Under The Hood |
Starter Positive Wire (+) | Not Used |
Starter Positive Wire Location | This vehicle requires a special GM Passlock 2 bypass module. |
Second Starter Positive Wire (+) | N/A |
Second Starter Positive Wire Location | N/A |
Ignition Positive Wire (+) | White/Green To Dark Blue |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | This vehicle requires a special GM Passlock 2 bypass module. |
Second Ignition Positive Wire Location | N/A |
Third Ignition Positive Wire (+) | N/A |
Third Ignition Positive Wire Location | N/A |
Accessory Positive Wire (+) | White/Red To Brown |
Accessory Positive Wire Location | Ignition Switch Harness |
Second Accessory Positive Wire (+) | N/A |
Second Accessory Positive Wire Location | N/A |
Key Sense Wire | N/A |
Key Sense Wire Location | N/A |
2007 GMC Canyon Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2007 GMC Canyon alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | Brown/White |
Parking Light Negative Wire Location | At BCM, Gray Plug, Pin A7. The BCM (body control module) is located in the passenger kick panel. |
Parking Light Positive Wire (+) | Brown |
Parking Light Positive Wire Location | At BCM, Black Plug, Pin A48. The BCM (body control module) is located in the passenger kick panel. |
Power Door Lock Negative Wire (-) | Light Blue |
Power Door Lock Negative Wire Location | At BCM, Black Plug, Pin A11. The BCM (body control module) is located in the passenger kick panel. |
Power Door Unlock Negative Wire (-) | Dark Blue |
Power Door Unlock Negative Wire Location | In Either Door Harness |
Door Trigger Negative Wire (-) | This vehicle has (4) door trigger wires the gray/black (-) is used for the drivers door, pin A32, the passenger door is a light green/black (-) pin A38, the drivers rear door is a light blue/black (-) pin A39 and the passengers rear door is a black/white (-) pin A39 all are located at the BCM black plug. When connecting to an alarm system use all 4 door trigger wires and diode isolate. |
Door Trigger Negative Wire Location | At BCM, Black Plug. The BCM (body control module) is located in the passenger kick panel. |
Dome Light Supervision Wire (-) | White |
Dome Light Supervision Wire Location | At BCM, Black Plug, Pin A46. The BCM (body control module) is located in the passenger kick panel. |
Trunk Release Negative Wire (-) | N/A |
Trunk Release Negative Wire Location | N/A |
Sliding Power Door Wire | N/A |
Sliding Power Door Wire Location | N/A |
Horn Negative Wire (-) | Green To Black |
Horn Negative Wire Location | At BCM, Gray Plug, Pin A25. The BCM (body control module) is located in the passenger kick panel. |
Tachometer Wire Negative Wire (-) | Any Wire That Is Not Pink Or Black |
Tachometer Wire Negative Wire Location | At Any Ignition Coil Or Fuel Injector |
Wait To Start Wire | N/A |
Wait To Start Location | N/A |
Brake Light Positive Wire (+) | Light Blue |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | N/A |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | GM New Passlock 2 Anti-Theft System |
Factory Anti-Theft System Location | N/A |
Feel free to use any 2007 GMC Canyon alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2007 GMC Canyon car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2007 GMC Canyon.