2007 Chevrolet Suburban Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2007 Chevrolet Suburban alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant 12v+ Positive Wire (+) | Red/Black |
| Battery Constant 12v+ Positive Wire Location | Vehicle Fuse Box |
| Ignition Positive Wire (+) | Pink |
| Ignition Positive Wire Location | Ignition Switch Harness |
| Second Ignition Positive Wire (+) | White |
| Second Ignition Positive Wire Location | Ignition Switch Harness |
| Third Ignition Positive Wire (+) | N/A |
| Third Ignition Positive Wire Location | N/A |
| Accessory Positive Wire (+) | Brown |
| Accessory Positive Wire Location | Ignition Switch Harness |
| Second Accessory Positive Wire (+) | N/A |
| Second Accessory Positive Wire Location | N/A |
| Starter Positive Wire (+) | Yellow/Black (Requires positive through 1300 ohm resister.) |
| Starter Positive Wire Location | At ECM Module Behind Driver Headlight |
| Second Starter Positive Wire (+) | N/A |
| Second Starter Positive Wire Location | N/A |
| Key Sense Wire | Pink |
| Key Sense Wire Location | Ignition Switch Harness |
2007 Chevrolet Suburban Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2007 Chevrolet Suburban alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Parking Light Negative Wire (-) | Light Blue |
| Parking Light Negative Wire Location | At BCM Module Under the Driver Dash |
| Parking Lights Positive Wire (+) | N/A |
| Parking Lights Positive Wire Location | N/A |
| Power Door Lock Negative Wire (-) | Class 2 Data Interface Module Necessary |
| Power Door Lock Negative Wire Location | N/A |
| Power Door Unlock Negative Wire (-) | Class 2 Data Interface Module Necessary |
| Power Door Unlock Negative Wire Location | N/A |
| Door Trigger Negative Wire (-) | Gray/Black |
| Door Trigger Negative Wire Location | Pin #E in Plug C5 at BCM Module |
| Dome Light Supervision Wire (-) | Orange |
| Dome Light Supervision Wire Location | At BCM Module |
| Hood Trigger Negative Wire (-) | Pink/Black |
| Hood Trigger Negative Wire Location | Pin #17 in Plug C4 at BCM Module |
| Trunk Trigger Negative Wire (-) | Pink/Black |
| Trunk Trigger Negative Wire Location | Pin #12 in Plug C6 at BCM Module |
| Sliding Power Door Wire | N/A |
| Sliding Power Door Wire Location | N/A |
| Horn Negative Wire (-) | Tan |
| Horn Negative Wire Location | Pin #18 in Plug C5 at BCM Module |
| Brake Light Positive Wire (+) | Light Blue/White |
| Brake Light Positive Wire Location | At Switch Above the Brake Pedal |
| Factory Alarm Disarm Wire (-) | N/A |
| Factory Alarm Disarm Wire Location | N/A |
| Factory Anti-Theft System | Passkey III Vehicle Key Immobilizer |
| Factory Anti-Theft System Type | Key Sends a RF Signal to the BCM Module |
Feel free to use any 2007 Chevrolet Suburban alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2007 Chevrolet Suburban car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2007 Chevrolet Suburban.