2006 Hyundai Tiburon Car Stereo Radio Wiring Diagram

Whether your an expert Hyundai Tiburon mobile electronics installer, Hyundai Tiburon fanatic, or a novice Hyundai Tiburon enthusiast with a 2006 Hyundai Tiburon, a car stereo wiring diagram can save yourself a lot of time. Automotive wiring in a 2006 Hyundai Tiburon vehicles are becoming increasing more difficult to identify due to the installation of more advanced factory oem electronics.

One of the most time consuming tasks with installing an after market car stereo, car radio, satellite radio, xm radio, car speakers, tweeters, car subwoofer, crossovers, audio equalizer, car amplifier, mobile amp, car amplifier, mp3 player, ipod or any car audio electronics is identifying the correct color car audio wires for your 2006 Hyundai Tiburon.

The Modified Life staff has taken all its Hyundai Tiburon car radio wiring diagrams, Hyundai Tiburon car audio wiring diagrams, Hyundai Tiburon car stereo wiring diagrams, Hyundai Tiburon car radio wiring schematics, Hyundai Tiburon car wiring diagrams and cataloged them online for use by our visitors for free. Our automotive wiring diagrams allow you to enjoy your new mobile electronics rather than spend countless hours trying to figure out which wires goes to which 2006 Hyundai Tiburon part or component.

Feel free to use any Hyundai Tiburon car stereo wiring diagram that is listed on Modified Life but keep in mind that all information here is provided “as is” without any warranty of any kind and most of the car audio wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the Hyundai Tiburon wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 2006 Hyundai Tiburon.


If you have any questions pertaining to the audio system in the 2006 Hyundai Tiburon, please feel free to post it at the bottom of this page and either we’ll do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you’re looking for.

Request a Car Stereo Wiring Diagram

If you can’t find a particular car audio wire diagram on Modified Life, please feel free to post a car radio wiring diagram request at the bottom of this page and we’ll do our best to find you the diagram or schematic you need for your mobile audio installation.

Adding More Information

If you would like to help the Modified Life community by adding any missing information or adding a new car audio wire diagram to our resource, please feel free to post it at the bottom of this page.

2006 Hyundai Tiburon Car Stereo Radio Wiring Diagram

Radio Constant 12V+ Wire: Red
Radio Ignition Switched 12V+ Wire: Yellow
Radio Ground Wire: Black
Radio Illumination Dimmer Wire: Pink/Black
Radio Antenna Trigger Wire: N/A
Radio Amplifier Trigger Wire: White/Orange
Front Speakers Size: N/A
Front Speakers Location: N/A
Left Front Speaker Wire (+): White
Left Front Speaker Wire (-): Brown
Right Front Speaker Wire (+): Black
Right Front Speaker Wire (-): Yellow
Rear Speakers Size: N/A
Rear Speakers Location: N/A
Left Rear Speaker Wire (+): Blue
Left Rear Speaker Wire (-): Red
Right Rear Speaker Wire (+): Green
Right Rear Speaker Wire (-): Orange

Make Your Hyundai Tiburon Car Stereo Installation Easy with these Products


  • Reply Travis Hung June 12, 2008 at 1:30 am

    2007 hyundai tiburon wire harness.

  • Reply ModifiedLife June 12, 2008 at 3:49 pm

    Travis, ask and you shall receive: 2007 Hyundai Tiburon Car Stereo Wiring Diagram

  • Reply DANIEL TORRES February 4, 2010 at 8:34 am

    what color is the remote wire on a 2006 hyundai tiburon I want to add an amplifier so i need it to turn off and on when i turn the radio off and on

  • Reply ModifiedLife February 9, 2010 at 7:51 pm

    Daniel, the amplifier remote wire in a 2006 Hyundai Tiburon is white/orange and can be found in the factory radio wiring harness. Hope this helps. Good luck with your 2006 Hyundai Tiburon stereo wiring diagram needs.

  • Reply zack July 12, 2010 at 6:44 pm

    i have a 2006 hyundai tiburon and i hooked the harness and everything to my new custom stero and it will turn on but nothing will play through the speakers there is one group of wires that arnt connected but i dont know what they do

  • Reply ModifiedLife July 12, 2010 at 8:38 pm

    TBone, your 2006 Hyundai Tiburon may have a factory amplifier that needs to be turned on by your after market radio. The car stereo amplifier trigger wire has to be wired up to turn on your factory amplifier.

    Please refer to: 2006 Hyundai Tiburon Car Radio Wire Guide

  • Reply TBone July 13, 2010 at 3:30 pm

    In my 2006 Hyundai Tiburon with a factory-installed Kenwood head unit, I tapped into the yellow switched power wire for a powered iPod/iPhone audio aux input device (the iSimple IS75 Polywire to be exact) and with the ignition off, it is still able to pull power. Is this wiring diagram incorrect? How can the device still be getting power with the ignition off and key removed?

  • Reply ModifiedLife July 13, 2010 at 6:31 pm

    TBone, use a Automotive Wire Circuit Tester to test the wires behind your radio. While the ignition is off, tap a wire with your circuit tester then turn your ignition to battery. If your tester lights up when the battery is on and the light turns off when the ignition is off then you’ve found the switched power wire. Repeat for every wire until you find the correct one. Hope this helps. Good luck with your 2006 Hyundai Tiburon Apple iPod aux input installation.

  • Reply TBone July 14, 2010 at 3:29 pm

    Thanks for the tip! I found a manual for my stereo (Kenwood EZ-500) online, and apparently the switched power wire in the stereo harness is RED. Problem solved.

  • Reply ModifiedLife July 14, 2010 at 9:57 pm

    TBone, we are glad we could help you with troubleshooting your 2006 Hyundai Tiburon stereo.

  • Reply vickie May 7, 2011 at 1:59 pm

    I need to know where to hook up the antenna on a 2006 hyundai tiburon. It was pulled loose when I bought the car, and I have looked but can’t find where to hook it back up. there is just a cable hanging from the antenna, it looked like it was ran up through the back above the tire, but i haven’t been able to find the other end.

  • Reply Chuck D. May 22, 2011 at 7:42 pm

    I had a problem with my Kenwood factory stereo in my 06 Tiburon. Whenever I would hit a bump in the road, the left side would cut out. Eventually it got worse, where all the sound would cut out, and then finally, I just couldn’t get sound at all (even without hitting bumps in the road). It was getting power, but no sound.

    I noticed when I went to remove the stereo to check it out, when it was pulled out of the dash, the sound worked fine. When I pushed it back into place, the sound would cut out again. If I wiggled the wires where they went into the stereo, the sound would come and go. It seemed there was a short in the wiring harness between the stereo and the car wiring.

    I got a new wiring harness and replaced the old one. However, now I’m not getting any power to the stereo. It won’t come on at all. Not only that, but when it’s plugged in, the keyless entry remote won’t work. It won’t lock or unlock the doors. Unplug the stereo, keyless remote works fine. (It does the same thing now with the old harness plugged in, too, which it didn’t do before. Even though the sound would cut out, the stereo would still get power. Now, nothing.)

    Yes, I checked all the fuses, inside, under the hood, and the one on the stereo itself. I also checked the wiring with a multimeter, and it’s getting power all the way to where the harness plugs into the stereo. anyone?

  • Reply Geoff January 13, 2012 at 5:13 pm

    I have a 2006 hyundai tiburon. It has a infiniti stereo system. I need a harness or how to bypass the amp altogether. I have never bypassed one before so would rather have the infiniti harness. can anyone please help?

  • Leave a Reply

    4 × 2 =