2006 Acura MDX Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2006 Acura MDX alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant 12v+ Positive Wire (+) | White |
| Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness, Back Of Ignition Switch |
| Starter Positive Wire (+) | Black/White |
| Starter Positive Wire Location | Ignition Switch Harness, Back Of Ignition Switch |
| Ignition Positive Wire (+) | Black/Yellow |
| Ignition Positive Wire Location | Ignition Switch Harness, Back Of Igntion Switch |
| Accessory Positive Wire (+) | Yellow |
| Accessory Positive Wire Location | Ignition Switch Harness, Back Of Ignition Switch |
| Second Accessory Positive Wire (+) | White/Black |
| Second Accessory Positive Wire Location | Ignition Switch Harness, Back Of Ignition Switch |
2006 Acura MDX Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2006 Acura MDX alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Parking Light Negative Wire (-) | Red/Yellow |
| Parking Light Negative Wire Location | At Headlight Switch, White Plug, In Steering Column |
| Parking Light Positive Wire (+) | Red/Black |
| Parking Light Positive Wire Location | At Parking Light Relay Above Drivers Fuse Box Or At Drivers Fuse Box, 20-Pin Plug, Pin 18 |
| Power Door Lock Negative Wire (-) | Black/Orange (When testing the lock and unlock wires, you must use the power door lock switch on the passenger door.) |
| Power Door Lock Negative Wire Location | At Passenger Fuse Box (Top, Light Green 20-Pin Plug, Pin 6). |
| Power Door Unlock Negative Wire (-) | Blue/Orange (When testing the lock and unlock wires, you must use the power door lock switch on the passenger door.) |
| Power Door Unlock Negative Wire Location | At Passenger Fuse Box (Top, Light Green 20-Pin Plug, Pin 5). |
| Door Trigger Negative Wire (-) | Black/White |
| Door Trigger Negative Wire Location | At Passenger Fuse Box (Rear Light Green, 18-Pin Plug, Pin 8). |
| Dome Light Supervision Wire | Green/White (Requires Relay) |
| Dome Light Supervision Wire Location | At Drivers Under Dash Light (In 2-Pin Plug). |
| Horn Negative Negative Wire (-) | Light Green/Blue |
| Horn Negative Negative Wire Location | At Below Steering Column (In Gray Plug). |
| Tachometer Wire Negative Wire (-) | Green/Blue |
| Tachometer Wire Negative Wire Location | At Passenger Fuse Box (20-Pin Plug, Pin 10). For the tachometer wire you can also use any wire that is not black/white or black at any ignition coil. |
| Brake Light Positive Wire (+) | White/Black (2 Wires Use Either) |
| Brake Light Positive Wire Location | At Switch Above Brake Pedal |
| Factory Alarm Disarm Wire (-) | Black/Red To Blue |
| Factory Alarm Disarm Wire Location | At Door MUX Control (Light Blue Plug, Pin 16). The door MUX control unit is part of the power window master switch in the drivers door. When testing the factory disarm wire, you must test while turning the key in the drivers door key cylinder, turn to unlock. |
| Factory Anti-Theft Wire (-) | Transponder Anti-Theft System, Requires Bypass Module And Extra Ignition Key |
| Factory Anti-Theft Wire Location | Transponder At Ignition Switch Tumbler |
Feel free to use any 2006 Acura MDX alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2006 Acura MDX car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2006 Acura MDX.