2005 Chevrolet Impala Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2005 Chevrolet Impala alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant 12v+ Positive Wire (+) | Red |
| Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
| Ignition Positive Wire (+) | Pink |
| Ignition Positive Wire Location | Ignition Switch Harness |
| Second Ignition Positive Wire (+) | Dark Green |
| Second Ignition Positive Wire Location | Ignition Switch Harness |
| Third Ignition Positive Wire (+) | N/A |
| Third Ignition Positive Wire Location | N/A |
| Accessory Positive Wire (+) | Orange |
| Accessory Positive Wire Location | Ignition Switch Harness |
| Second Accessory Positive Wire (+) | Brown |
| Second Accessory Positive Wire Location | Ignition Switch Harness |
| Starter Positive Wire (+) | Yellow |
| Starter Positive Wire Location | Ignition Switch Harness |
| Second Starter Positive Wire (+) | N/A |
| Second Starter Positive Wire Location | N/A |
| Key Sense Wire | Light Green |
| Key Sense Wire Location | At Steering Column Harness |
2005 Chevrolet Impala Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2005 Chevrolet Impala alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Parking Light Negative Wire (-) | Light Blue |
| Parking Light Negative Wire Location | At Vehicle Light Switch |
| Parking Lights Positive Wire (+) | N/A |
| Parking Lights Positive Wire Location | N/A |
| Power Door Lock Negative Wire (-) | Orange/Black |
| Power Door Lock Negative Wire Location | At Switch in Driver Door |
| Power Door Unlock Negative Wire (-) | Orange/Black |
| Power Door Unlock Negative Wire Location | At Switch in Driver Door |
| Door Trigger Negative Wire (-) | You Must Diode Isolate Door Triggers at Doors |
| Door Trigger Negative Wire Location | N/A |
| Dome Light Supervision Wire (-) | N/A |
| Dome Light Supervision Wire Location | N/A |
| Hood Trigger Negative Wire (-) | N/A |
| Hood Trigger Negative Wire Location | N/A |
| Trunk Trigger Negative Wire (-) | Red/Black |
| Trunk Trigger Negative Wire Location | Pin #24 in Gray Plug at BCM Module |
| Sliding Power Door Wire | N/A |
| Sliding Power Door Wire Location | N/A |
| Horn Negative Wire (-) | Black |
| Horn Negative Wire Location | At BCM Module or Steering Column Harness |
| Brake Light Positive Wire (+) | White |
| Brake Light Positive Wire Location | At BCM Module |
| Factory Alarm Disarm Wire (-) | N/A |
| Factory Alarm Disarm Wire Location | N/A |
| Factory Anti-Theft System | GM Passkey II Key Vehicle Immobilizer |
| Factory Anti-Theft System Type | Key Sends a RF Signal to the BCM Module |
Feel free to use any 2005 Chevrolet Impala alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2005 Chevrolet Impala car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2005 Chevrolet Impala.