Whether your an expert Chevrolet Monte Carlo car alarm installer, Chevrolet Monte Carlo performance fan or a novice Chevrolet Monte Carlo enthusiast with a 2002 Chevrolet Monte Carlo, a Chevrolet Monte Carlo car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 2002 Chevrolet Monte Carlo.
The Modified Life staff has taken all its Chevrolet Monte Carlo car alarm wiring diagrams, Chevrolet Monte Carlo car security wiring diagrams, Chevrolet Monte Carlo car alarm wire diagrams, Chevrolet Monte Carlo car security wiring schematics, Chevrolet Monte Carlo car security diagrams, Chevrolet Monte Carlo remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.
Feel free to use any Chevrolet Monte Carlo auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided “as is” without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 2002 Chevrolet Monte Carlo.
Questions
If you have any questions pertaining to the car wiring in a 2002 Chevrolet Monte Carlo, please feel free to post it at the bottom of this page and either we’ll do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you’re looking for.
Request a Car Alarm Wiring Diagram
If you can’t find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we’ll do our best to find you the diagram, schematic or information you need for your mobile security installation.
Adding More Information
If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to email us at: contact@modifiedlife.com or post any additional car wiring information about the 2002 Chevrolet Monte Carlo on this page.
2002 Chevrolet Monte Carlo Auto Alarm Wiring Diagram
Battery Constant 12v+ Positive Wire (+): Red (It may be necessary to remove the radio to get to the back of the ignition switch. When removing the radio, do not unplug. All ignition connections must be made at the back of the ignition switch.)
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness
Starter Positive Wire (+): Yellow (It may be necessary to remove the radio to get to the back of the ignition switch. When removing the radio, do not unplug. All ignition connections must be made at the back of the ignition switch.)
Starter Positive Wire Location: Ignition Switch Harness
Ignition Positive Wire (+): Pink (It may be necessary to remove the radio to get to the back of the ignition switch. When removing the radio, do not unplug. All ignition connections must be made at the back of the ignition switch.)
Ignition Positive Wire Location: Ignition Switch Harness
Second Ignition Positive Wire (+): Green (It may be necessary to remove the radio to get to the back of the ignition switch. When removing the radio, do not unplug. All ignition connections must be made at the back of the ignition switch.)
Second Ignition Positive Wire Location: Ignition Switch Harness
Accessory Positive Wire (+): Orange (It may be necessary to remove the radio to get to the back of the ignition switch. When removing the radio, do not unplug. All ignition connections must be made at the back of the ignition switch.)
Accessory Positive Wire Location: Ignition Switch Harness
Parking Light Negative Wire (-): White (An extra relay part is need for the (-) negative parking light isolation circuit on this vehicle.)
Parking Light Negative Wire Location: At BCM, Pink Plug, Pin A2. The BCM (body control module) is located just above the brake pedal. It is a plastic box with (3) plugs that face firewall.
Parking Light Positive Wire (+): Do Not Use.
Parking Light Positive Wire Location: N/A
Power Door Lock Negative Wire (-): Orange/Black (1-Wire System). This vehicle uses a 1 wire door locking system, a (-) negative through a 480 ohm resistor will lock the doors and a straight (-)negative will unlock the doors, for this to operate properly all doors must be closed.
Power Door Lock Negative Wire Location: At BCM, Gray 24-Pin Plug. The BCM (body control module) is located just above the brake pedal. It is a plastic box with (3) plugs that face firewall.
Power Door Unlock Negative Wire (-): Same Wire As Above
Power Door Unlock Negative Wire Location: N/A
Door Trigger Positive Wire (+): This vehicle has (2) door trigger wires. The blue (-) is for the drivers door and the blue/white (-) is for the passengers door. When connecting to an alarm system uses both wires and diode isolate.
Door Trigger Positive Wire Location: At BCM, Gray 16-Pin Plug. The BCM (body control module) is located just above the brake pedal. It is a plastic box with (3) plugs that face firewall.
Domelight Supervision Wire (-): Blue
Domelight Supervision Wire Location: At BCM, Gray 16-Pin Plug. The BCM (body control module) is located just above the brake pedal. It is a plastic box with (3) plugs that face firewall.
Trunk Release Negative Wire (-): Black (Requires Relay)
Trunk Release Negative Wire Location: At Trunk Release Switch
Horn Negative Negative Wire (-): Black
Horn Negative Negative Wire Location: At Steering Column Harness
Tachometer Wire Negative Wire (-): White
Tachometer Wire Negative Wire Location: At Ignition Module
Brake Light Positive Wire (+): White
Brake Light Positive Wire Location: At Switch Above Brake Pedal
Factory Alarm Disarm Wire (-): Light Green
Factory Alarm Disarm Wire Location: At BCM, Gray 16-Pin Plug. The BCM (body control module) is located just above the brake pedal. It is a plastic box with (3) plugs that face firewall.
Factory Anti-Theft Wire: Yellow (+) and Black (-) and White (Not Used)
Factory Anti-Theft Wire Location: GM Passlock 2 System (Wires Are At The Top Of The Ignition Switch Tumbler).
Comments