MODIFIEDLIFE

2000 Chrysler Concorde Car Alarm Wiring Guide


Whether your an expert Chrysler Concorde car alarm installer, Chrysler Concorde performance fan or a novice Chrysler Concorde enthusiast with a 2000 Chrysler Concorde, a Chrysler Concorde car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 2000 Chrysler Concorde headlight bulb size you need for your low beam or high beam and save time. Also, find your other car light bulb sizes including your fog light, reverse light, turn signal, brake light and more. It’s that easy!

The Modified Life staff has taken all its Chrysler Concorde car alarm wiring diagrams, Chrysler Concorde car security wiring diagrams, Chrysler Concorde car alarm wire diagrams, Chrysler Concorde car security wiring schematics, Chrysler Concorde car security diagrams, Chrysler Concorde remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.

Feel free to use any Chrysler Concorde auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided “as is” without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 2000 Chrysler Concorde.

Questions

If you have any questions pertaining to the car wiring in a 2000 Chrysler Concorde, please feel free to post it at the bottom of this page and either we’ll do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.

Request a Car Alarm Wiring Diagram

If you can’t find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we’ll do our best to find you the diagram, schematic or information you need for your mobile security installation.

Adding More Information

If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to post any additional car wiring information about the 2000 Chrysler Concorde on this page.

2000 Chrysler Concorde Car Alarm Wiring Guide

Battery Constant 12v+ Positive Wire (+): Pink/Black
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness

Starter Positive Wire (+): Yellow
Starter Positive Wire Location: Ignition Switch Harness

Ignition Positive Wire (+): Dark Blue/White
Ignition Positive Wire Location: Ignition Switch Harness

Second Ignition Positive Wire (+): Green/Red
Second Ignition Positive Wire Location: Ignition Switch Harness

Accessory Positive Wire (+): Black/Orange
Accessory Positive Wire Location: Ignition Switch Harness

Second Accessory Positive Wire (+): Black/White
Second Accessory Positive Wire Location: Ignition Switch Harness

Parking Light Negative Wire (-): Yellow (The parking lights require an extra relay part and a (-) negative through a 110 ohm resistor.)
Parking Light Negative Wire Location: At Headlight Switch

Parking Light Positive Wire (+): Do Not Use!
Parking Light Positive Wire Location: N/A

Power Door Lock Negative Wire (-): White/Green (1-Wire Door Lock System). The door locks on this vehicle require a (+) positive through a 2700 ohm resistor to lock and a (+) positive through a 620 ohm resistor to unlock, some units will also require 2 extra relays for the keyless entry feature to function.
Power Door Lock Negative Wire Location: At Back Of Fuse Box.

Power Door Unlock Negative Wire (-): Same Wire
Power Door Unlock Negative Wire Location: N/A

Door Trigger Negative Wire (-): Tan and Tan/Red (Use Both). You must use both the tan (-) and the tan/red (-) wires when connecting to an alarm system and diode isolate.
Door Trigger Negative Wire Location: At BCM. The BCM (body control module) is located on the left side of the dash attached to the junction block.

Dome Light Supervision Wire (-): Yellow (Requires Relay)
Dome Light Supervision Wire Location: At Rear Of Fuse Box (Brown Plug).

Trunk Release Positive Wire (+): Black/White (Requires Relay)
Trunk Release Positive Wire Location: At Trunk Release Switch

Horn Negative Negative Wire (-): Black/Red
Horn Negative Negative Wire Location: At Steering Column Harness

Tachometer Wire Negative Wire (-): This vehicle is a multi-coil system, for tachometer use any wire at the coil pack that has a tan stripe wire.
Tachometer Wire Negative Wire Location: At Ignition Coil Pack

Brake Light Positive Wire (+): White/Tan
Brake Light Positive Wire Location: At Switch Above Brake Pedal

Factory Alarm Disarm Wire (+): Light Green/Orange (The disarm wire requires an extra relay and a (+) positive thru a 680 ohm resistor.)
Factory Alarm Disarm Wire Location: In Drivers Kick Panel

Factory Anti-Theft System: Chrysler sentry key (gray key only) a transponder system.

Leave a Comment

Your email address will not be published. Required fields are marked *