MODIFIEDLIFE

2000 Buick LeSabre Auto Alarm Wiring Diagram


Whether your an expert Buick LeSabre car alarm installer, Buick LeSabre performance fan or a novice Buick LeSabre enthusiast with a 2000 Buick LeSabre, a 2000 Buick LeSabre car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 2000 Buick LeSabre headlight bulb size you need for your low beam or high beam and save time. Also, find your other car light bulb sizes including your fog light, reverse light, turn signal, brake light and more. It’s that easy!

The Modified Life staff has taken all its Buick LeSabre car alarm wiring diagrams, Buick LeSabre car security wiring diagrams, Buick LeSabre car alarm wire diagrams, Buick LeSabre car security wiring schematics, Buick LeSabre car security diagrams, Buick LeSabre remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.

Feel free to use any Buick LeSabre auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided as-is without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 2000 Buick LeSabre.

Questions

If you have any questions pertaining to the car wiring in a 2000 Buick LeSabre, please feel free to post it at the bottom of this page and either we will do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.

Request a Car Alarm Wiring Diagram

If you can not find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we will do our best to find you the diagram, schematic or information you need for your mobile security installation.

Adding More Information

If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to post any additional car wiring information about the 2000 Buick LeSabre on this page.

2000 Buick LeSabre Auto Alarm Installation Diagram

Battery Constant 12v+ Positive Wire (+): Connect To Battery Only
Battery Constant 12v+ Positive Wire Location: Under The Hood

Starter Positive Wire (+): Purple or Yellow
Starter Positive Wire Location: Ignition Switch Harness

Second Starter Positive Wire (+): N/A
Second Starter Positive Wire Location: N/A

Ignition Positive Wire (+): Pink
Ignition Positive Wire Location: Ignition Switch Harness

Second Ignition Positive Wire (+): White
Second Ignition Positive Wire Location: Ignition Switch Harness

Third Ignition Positive Wire (+): N/A
Third Ignition Positive Wire Location: N/A

Accessory Positive Wire (+): Orange
Accessory Positive Wire Location: Ignition Switch Harness

Second Accessory Positive Wire (+): Brown
Second Accessory Positive Wire Location: Ignition Switch Harness

Key Sense Wire: N/A
Key Sense Wire Location: N/A

Parking Light Negative Wire (-): Brown/White
Parking Light Negative Wire Location: At DIM Module. The DIM Module is located just in front of the blower motor near the passenger kick panel. The DIM Module has (3) connectors that all exit out the bottom of the module.

Parking Light Positive Wire (+): Do Not Use!
Parking Light Positive Wire Location: N/A

Power Door Lock Negative Wire (-): Red/Black
Power Door Lock Negative Wire Location: At Drivers Door Lock Switch

Power Door Unlock Negative Wire (-): Orange/Black
Power Door Unlock Negative Wire Location: At Drivers Door Lock Switch

Door Trigger Negative Wire (-): Tan (-) And Dark Blue (Use Both Wires).
Door Trigger Negative Wire Location: In Each Door Module. The driver door wire is a tan (-) at the driver door module in the driver door, and the other door triggers are a dark blue (-) at all other door modules, when connecting to an alarm system use all 4 wires and diode isolate.

Dome Light Supervision Wire (-): Gray (Requires Relay)
Dome Light Supervision Wire Location: At Under Dash Light

Trunk Release Negative Wire (-): Light Blue
Trunk Release Negative Wire Location: At RIM Module. The RIM module is located behind the rear seat in the upper corner on the driver side.

Sliding Power Door Wire: N/A
Sliding Power Door Wire Location: N/A

Horn Negative Wire (-): Black
Horn Negative Wire Location: At DIM Module. The DIM Module is located just in front of the blower motor near the passenger kick panel. The DIM Module has (3) connectors that all exit out the bottom of the module.

Tachometer Wire Negative Wire (-): Purple/White
Tachometer Wire Negative Wire Location: At Ignition Coil

Wait To Start Wire: N/A
Wait To Start Location: N/A

Brake Light Positive Wire (+): White
Brake Light Positive Wire Location: At Switch Above Brake Pedal

Factory Alarm Disarm Wire (-): Light Green
Factory Alarm Disarm Wire Location: In Drivers Door Module In Door

Factory Anti-Theft System: GM Passkey 3 (Pk3 On Steel Shaft Of Ignition Key) Transponder System
Factory Anti-Theft System Location: Transponder At Ignition Switch Tumbler

The 2000 Buick LeSabre alarm wire color information above is updated as it is submitted by the Modified Life community.

Leave a Comment

Your email address will not be published. Required fields are marked *