2000 Acura TL Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2000 Acura TL alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant 12v+ Positive Wire (+) | White |
| Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
| Starter Positive Wire (+) | Black/White |
| Starter Positive Wire Location | Ignition Switch Harness |
| Ignition Positive Wire (+) | Black/Yellow |
| Ignition Positive Wire Location | Ignition Switch Harness |
| Accessory Positive Wire (+) | Yellow |
| Accessory Positive Wire Location | Ignition Switch Harness |
| Second Accessory Positive Wire (+) | White/Black |
| Second Accessory Positive Wire Location | Ignition Switch Harness |
2000 Acura TL Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2000 Acura TL alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Parking Light Negative Wire (-) | Red/Yellow |
| Parking Light Negative Wire Location | At Headlight Switch |
| Parking Light Positive Wire (+) | Red/Black |
| Parking Light Positive Wire Location | At Top Of Passenger Fuse Box, 4-Pin Green Plug |
| Power Door Lock Negative Wire (-) | Black/Blue |
| Power Door Lock Negative Wire Location | At Passenger Fuse Box (Located in a blue or gray 22 pin connector in front of the passenger fuse box. Use the key switch in the passenger door to test.) |
| Power Door Unlock Negative Wire (-) | Orange |
| Power Door Unlock Negative Wire Location | At Passenger Fuse Box (Located in a blue or gray 22 pin connector in front of the passenger fuse box. Use the key switch in the passenger door to test.) |
| Door Trigger Negative Wire (-) | Black/White (Requires Relay) |
| Door Trigger Negative Wire Location | At Top Of Passenger Fuse Box, 4-Pin Green Plug |
| Dome Light Supervision Wire | Use Door Trigger |
| Dome Light Supervision Wire Location | N/A |
| Trunk Release Positive Wire (+) | White/Red or White (Requires Relay) |
| Trunk Release Positive Wire Location | In Drivers Kick Panel Or Passenger Mux Plug (The passengers mux module is located behind the glovebox.) |
| Horn Negative Negative Wire (-) | Light Green/Blue |
| Horn Negative Negative Wire Location | At Steering Column Harness |
| Tachometer Wire Negative Wire (-) | Blue |
| Tachometer Wire Negative Wire Location | At Tach Test Connector (The tachometer test connector is a 2 pin connector near the air intake on the driver side shock tower.) |
| Brake Light Positive Wire (+) | White/Black |
| Brake Light Positive Wire Location | At Switch Above Brake Pedal |
| Factory Alarm Disarm Wire (-) | Black/Red To Blue |
| Factory Alarm Disarm Wire Location | This wire is located at the drivers door key cylinder in drivers door. To test, you must turn the key in the drivers door key cylinder to unlock. |
| Factory Anti-Theft System | Transponder anti-theft system, requires bypass module and extra ignition key. |
Feel free to use any 2000 Acura TL alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2000 Acura TL car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2000 Acura TL.