Whether your an expert Honda Accord car alarm installer, Honda Accord performance fan or a novice Honda Accord enthusiast with a 1998 Honda Accord, a 1998 Honda Accord car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 1998 Honda Accord.

The Modified Life staff has taken all its Honda Accord car alarm wiring diagrams, Honda Accord car security wiring diagrams, Honda Accord car alarm wire diagrams, Honda Accord car security wiring schematics, Honda Accord car security diagrams, Honda Accord remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.

Feel free to use any Honda Accord auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided as-is without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 1998 Honda Accord.

Questions

If you have any questions pertaining to the car wiring in a 1998 Honda Accord, please feel free to post it at the bottom of this page and either we will do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.

Request a Car Alarm Wiring Diagram

If you can not find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we will do our best to find you the diagram, schematic or information you need for your mobile security installation.

Adding More Information

If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to post any additional car wiring information about the 1998 Honda Accord on this page.

1998 Honda Accord Car Alarm Wiring Instructions

Battery Constant 12v+ Positive Wire (+): White
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness

Starter Positive Wire (+): Black/White (If doing a starter kill you must interrupt the wire between the key switch and the fuse box, not between the fuse box and the starter to keep the check engine light from coming on.)
Starter Positive Wire Location: Ignition Switch Harness

Second Starter Positive Wire (+): N/A
Second Starter Positive Wire Location: N/A

Ignition Positive Wire (+): Black/Yellow
Ignition Positive Wire Location: Ignition Switch Harness

Second Ignition Positive Wire (+): N/A
Second Ignition Positive Wire Location: N/A

Third Ignition Positive Wire (+): N/A
Third Ignition Positive Wire Location: N/A

Accessory Positive Wire (+): Yellow
Accessory Positive Wire Location: Ignition Switch Harness

Second Accessory Positive Wire (+): White/Black
Second Accessory Positive Wire Location: Ignition Switch Harness

Key Sense Wire: N/A
Key Sense Wire Location: N/A

Parking Light Negative Wire (-): Red/Yellow
Parking Light Negative Wire Location: At Steering Column Harness

Parking Light Positive Wire (+): Red/Black
Parking Light Positive Wire Location: In Driver Side Fusebox

Power Door Lock Negative Wire (-): Black/Blue (Use black/white (-) for lock and green/red (-) for unlock on LX models without factory security. These wires are located in a 2-Pin gray connector by the front of the drivers side fuse box.)
Power Door Lock Negative Wire Location: In Passenger Side Fusebox

Power Door Unlock Negative Wire (-): Orange (Use black/white (-) for lock and green/red (-) for unlock on LX models without factory security. These wires are located in a 2 pin gray connector by the front of the drivers side fuse box.)
Power Door Unlock Negative Wire Location: In Passenger Side Fusebox

Door Trigger Negative Wire (-): Black/White
Door Trigger Negative Wire Location: In Passenger Side Fusebox

Dome Light Supervision Wire (-): Use Door Trigger, Requires Relay
Dome Light Supervision Wire Location: N/A

Trunk Release Positive Wire (+): White/Red (Requires Relay)
Trunk Release Positive Wire Location: In Drivers Kick Panel

Sliding Power Door Wire: N/A
Sliding Power Door Wire Location: N/A

Horn Negative Wire (-): Light Green/Blue
Horn Negative Wire Location: At Steering Column Harness

Tachometer Wire Negative Wire (-): Blue (The tach test connector is located behind the battery on the 4 cylinder and on a bracket attached to the drivers side strut tower on the 6 cylinder. The tach test connector is a white 2-Pin connector and may be covered by a black rubber boot.)
Tachometer Wire Negative Wire Location: At Tach Test Connector

Wait To Start Wire: N/A
Wait To Start Location: N/A

Brake Light Positive Wire (+): White/Black
Brake Light Positive Wire Location: At Switch Above Brake Pedal

Factory Alarm Disarm Wire (-): Blue (On the EX model the blue (-) is located at the power window switch, on the LX model the wire is located at the keyless/security module attached to the drivers under dash panel.)
Factory Alarm Disarm Wire Location: N/A

Factory Anti-Theft System: Transponder Anti-Theft System, Requires Bypass Module And Extra Ignition Key
Factory Anti-Theft System Location: Transponder At Ignition Switch Tumbler

The 1998 Honda Accord alarm wire color information above is updated as it is submitted by the Modified Life community.

Make Your Car Alarm Installation Easy with these Tools and Accessories
Save Up to 60% Off Car Alarms and Auto Security