Whether your an expert Dodge Caravan car alarm installer, Dodge Caravan performance fan or a novice Dodge Caravan enthusiast with a 1998 Dodge Caravan, a Dodge Caravan car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 1998 Dodge Caravan.

The Modified Life staff has taken all its Dodge Caravan car alarm wiring diagrams, Dodge Caravan car security wiring diagrams, Dodge Caravan car alarm wire diagrams, Dodge Caravan car security wiring schematics, Dodge Caravan car security diagrams, Dodge Caravan remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.

Feel free to use any Dodge Caravan auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided “as is” without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 1998 Dodge Caravan.

Questions

If you have any questions pertaining to the car wiring in a 1998 Dodge Caravan, please feel free to post it at the bottom of this page and either we’ll do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.

Request a Car Alarm Wiring Diagram

If you can’t find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we’ll do our best to find you the diagram, schematic or information you need for your mobile security installation.

Adding More Information

If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to post any additional car wiring information about the 1998 Dodge Caravan on this page.

1998 Dodge Caravan Auto Alarm Wiring Guide

Battery Constant 12v+ Positive Wire (+): Red
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness

Starter Positive Wire (+): Yellow
Starter Positive Wire Location: Ignition Switch Harness

Ignition Positive Wire (+): Dark Blue
Ignition Positive Wire Location: Ignition Switch Harness

Second Ignition Positive Wire (+): Black/White
Second Ignition Positive Wire Location: Ignition Switch Harness

Accessory Positive Wire (+): Black/Orange
Accessory Positive Wire Location: Ignition Switch Harness

Parking Light Negative Wire (-): Green/White or Green/Red (The parking light wire is a green/white or a green/red on this vehicle and are a (-) negative type. These wires are located at the back of the headlight switch in a black plug. To connect this wire will require an extra relay to connect. You can also find a (+) positive parking light wire at the passenger side marker light in a black harness out under the hood, open up this harness and test for the correct parking light wire. You can see this harness heading into a large hole in the front passenger fender in front of the windshield washer bottle, by making the connection there, you will not need to add the extra relay.)
Parking Light Negative Wire Location: At Headlight Switch

Parking Light Positive Wire (+): The parking light wire is a green/white or a green/red on this vehicle and are a (-) negative type. These wires are located at the back of the headlight switch in a black plug. To connect this wire will require an extra relay to connect. You can also find a (+) positive parking light wire at the passenger side marker light in a black harness out under the hood, open up this harness and test for the correct parking light wire. You can see this harness heading into a large hole in the front passenger fender in front of the windshield washer bottle, by making the connection there, you will not need to add the extra relay.
Parking Light Positive Wire Location: At Marker Light Wire, Out Under Hood

Power Door Lock Negative Wire (-): White/Dark Green Or White/Light Green (1-Wire Door Lock System). This vehicle uses a 1-wire door locking system and will require extra parts. To lock requires a (-) negative through a 1500, arm requires a (-) negative through a 4020 ohm resistor and to unlock requires a (-) negative through a 250 ohm resistor and disarm requires a (-) negative through a 665 ohm resistor. Some units will also require 2 extra relays to connect.
Power Door Lock Negative Wire Location: At Left (White) Plug, At Very Bottom Of Fusebox/BCM. The plug at the fusebox/BCM that contains the power door lock wire is the (white) left plug, closest to the e-brake pedal. To remove this plug, pull the carpeting out from under this plug (this will give you more room to remove this plug) press on the white release tab and wobble the plug from the bottom of the fusebox/BCM. At this time the power locks will not function. Remove the electrical tape from the harness and separate the white/light green and white/dark green wires from the rest of the wires in this plug, and plug this harness back into the bottom of the fusebox/BCM. The harness must be plugged back into the BCM to test the lock/unlock wire.

Power Door Unlock Negative Wire (-): Same Wire As Above.
Power Door Unlock Negative Wire Location: N/A

Door Trigger Negative Wire (-): Brown/Light Green (Requires Relay)
Door Trigger Negative Wire Location: At Domelight On/Off Switch

Domelight Supervision Wire (-): Brown/White (Requires Relay)
Domelight Supervision Wire Location: At Domelight On/Off Switch

Horn Negative Wire (-): Gray/Orange
Horn Negative Wire Location: At Top Right Plug Of Fusebox

Tachometer Wire Negative Wire (-): Gray Or Gray/Red
Tachometer Wire Negative Wire Location: At Coil Pack

Brake Light Positive Wire (+): White/Tan
Brake Light Positive Wire Location: At Switch Above Brake Pedal, Gray Plug

Factory Alarm Disarm Wire (-): To Disarm/Arm. You will need to unlock the vehicle, before remote starting to keep the factory security from sounding.
Factory Alarm Disarm Wire Location: N/A

Factory Anti-Theft System: Chrysler Sentry Key (Gray Key Only) A Transponder System
Factory Anti-Theft System Location: Transponder At Ignition Switch Tumbler

Make Your Car Alarm Installation Easy with these Tools and Accessories
Save Up to 60% Off Car Alarms and Auto Security