1997 Chevrolet Camaro Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1997 Chevrolet Camaro alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Red |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Yellow |
Starter Positive Wire Location | Ignition Switch Harness |
Second Starter Positive Wire (+) | N/A |
Second Starter Positive Wire Location | N/A |
Ignition Positive Wire (+) | Pink |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | N/A |
Second Ignition Positive Wire Location | N/A |
Third Ignition Positive Wire (+) | N/A |
Third Ignition Positive Wire Location | N/A |
Accessory Positive Wire (+) | Orange |
Accessory Positive Wire Location | Ignition Switch Harness |
Second Accessory Positive Wire (+) | N/A |
Second Accessory Positive Wire Location | N/A |
Key Sense Wire | N/A |
Key Sense Wire Location | N/A |
1997 Chevrolet Camaro Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1997 Chevrolet Camaro alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | N/A |
Parking Light Negative Wire Location | N/A |
Parking Light Positive Wire (+) | Brown |
Parking Light Positive Wire Location | In Drivers Kick Panel |
Power Door Lock Negative Wire (-) | Red/Black |
Power Door Lock Negative Wire Location | At BCM In Passenger Kick |
Power Door Unlock Negative Wire (-) | Tan And Gray/Black (5 Wire Reverse Polarity). Use Both. The tan wire will unlock the drivers door and the gray/black will unlock the passenger door. Both wires must be wired in as a 5 wire reverse polarity system and use a relay for each wire. |
Power Door Unlock Negative Wire Location | At BCM In Passenger Kick. |
Door Trigger Negative Wire (-) | Gray/Black And Black/White (Use Both). This vehicle has 2 door trigger wires, when connecting to an alarm system, use both wires and diode isolate. |
Door Trigger Negative Wire Location | At BCM In Passenger Kick Panel |
Dome Light Supervision Wire (-) | Gray/Black |
Dome Light Supervision Wire Location | At BCM In Passenger Kick Panel |
Trunk Release Positive Wire (+) | Black/White |
Trunk Release Positive Wire Location | At Relay Near Passenger Kick Panel |
Sliding Power Door Wire | N/A |
Sliding Power Door Wire Location | N/A |
Horn Negative Wire (-) | Black |
Horn Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | White Or Red/Black (The tachometer wire on the V6 is a white at the left front cylinder head. On the V8 the tachometer wire is in a 4-pin plug at the passenger side valve cover.) |
Tachometer Wire Negative Wire Location | At Coil/Distributor Assembly |
Wait To Start Wire | N/A |
Wait To Start Location | N/A |
Brake Light Positive Wire (+) | Light Blue |
Brake Light Positive Wire Location | N/A |
Factory Alarm Disarm Wire (-) | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | 2 White Wires Or 1 White And 1 Purple Or Purple/White In An Orange Or Black Tube In Running Down Steering Column |
Factory Anti-Theft System Location | GM Vats System At Ignition Switch |
Feel free to use any 1997 Chevrolet Camaro alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1997 Chevrolet Camaro car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1997 Chevrolet Camaro.