1992 Acura Legend Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1992 Acura Legend alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | White |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Black/White |
Starter Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Black/Yellow |
Ignition Positive Wire Location | Ignition Switch Harness |
Accessory Positive Wire (+) | Yellow |
Accessory Positive Wire Location | Ignition Switch Harness |
1992 Acura Legend Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1992 Acura Legend alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | Red/Green |
Parking Light Negative Wire Location | At Steering Column Harness |
Parking Light Positive Wire (+) | Red/Black |
Parking Light Positive Wire Location | In Drivers Kick Panel Or Fuse Box |
Power Door Lock Negative Wire (-) | Green/White |
Power Door Lock Negative Wire Location | At Door Lock Module. The door lock module and factory anti-theft module are mounted together between steering column and center console above the gas pedal. You can also use the black/white (-) and black/red (-) for the lock wires at this module. |
Power Door Unlock Negative Wire (-) | Green/Red |
Power Door Unlock Negative Wire Location | At Door Lock Module. The door lock module and factory anti-theft module are mounted together between steering column and center console above the gas pedal. You can also use the black/white (-) and black/red (-) for the lock wires at this module. |
Door Trigger Negative Wire (-) | White/Black (-) or Black/White (-) |
Door Trigger Negative Wire Location | At Plug Above Drivers Kick Panel |
Dome Light Supervision Wire | Use Door Trigger (Requires Relay) |
Dome Light Supervision Wire Location | N/A |
Trunk Release Positive Wire (+) | White/Black (Requires Relay) |
Trunk Release Positive Wire Location | In Drivers Kick Panel, Harness To Rear Of Vehicle. |
Horn Negative Negative Wire (-) | Blue/Red |
Horn Negative Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | Blue With Silver Dots |
Tachometer Wire Negative Wire Location | At Back Of Dash. The tachometer wire is located in a 12-pin green plug, back of the instrument cluster or at the tachometer test connector by the passenger side strut tower, single wire with plug. |
Brake Light Positive Wire (+) | Green/White |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | Green/Red |
Factory Alarm Disarm Wire Location | At Anti-Theft Module. The door lock module and factory anti-theft module are mounted together between steering column and center console above the gas pedal. You can also use the black/white (-) and black/red (-) for the lock wires at this module. |
Factory Anti-Theft Wire (-) | N/A |
Factory Anti-Theft Wire Location | N/A |
Feel free to use any 1992 Acura Legend alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1992 Acura Legend car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1992 Acura Legend.
2 thoughts on “1992 Acura Legend Car Alarm Wire Chart”
Preston, ask and you shall receive: 1989 Acura Legend Car Alarm Wiring Diagram
I was wondering if you had a 1989 generation 1 Acura Legend LS Sedan alarm diagram