1989 Acura Legend Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1989 Acura Legend alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant 12v+ Positive Wire (+) | White/Black And White |
| Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
| Starter Positive Wire (+) | Black/White |
| Starter Positive Wire Location | Ignition Switch Harness |
| Second Starter Positive Wire (+) | N/A |
| Second Starter Positive Wire Location | N/A |
| Ignition Positive Wire (+) | Black/Yellow |
| Ignition Positive Wire Location | Ignition Switch Harness |
| Second Ignition Positive Wire (+) | Yellow |
| Second Ignition Positive Wire Location | Ignition Switch Harness |
| Third Ignition Positive Wire (+) | N/A |
| Third Ignition Positive Wire Location | N/A |
| Accessory Positive Wire (+) | Blue/White |
| Accessory Positive Wire Location | Ignition Switch Harness |
| Second Accessory Positive Wire (+) | White/Red |
| Second Accessory Positive Wire Location | Ignition Switch Harness |
| Key Sense Wire | N/A |
| Key Sense Wire Location | N/A |
1989 Acura Legend Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1989 Acura Legend alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Parking Light Negative Wire (-) | N/A |
| Parking Light Negative Wire Location | N/A |
| Parking Light Positive Wire (+) | Red/Black |
| Parking Light Positive Wire Location | At Steering Column Harness |
| Power Door Lock Negative Wire (-) | Green/White |
| Power Door Lock Negative Wire Location | At Door lock Module. The door lock module is mounted on the rear drivers side of relay center located between the steering column and the drivers kick panel. To access the lock module, unbolt the relay center and drop it down. |
| Power Door Unlock Negative Wire (-) | Green/Red |
| Power Door Unlock Negative Wire Location | At Door lock Module. The door lock module is mounted on the rear drivers side of relay center located between the steering column and the drivers kick panel. To access the lock module, unbolt the relay center and drop it down. |
| Door Trigger Negative Wire (-) | Black/White (Requires Relay) |
| Door Trigger Negative Wire Location | At Instrument Cluster Harness |
| Dome Light Supervision Wire (-) | Use Door Trigger |
| Dome Light Supervision Wire Location | N/A |
| Trunk Release Positive Wire (+) | White/Black (Requires Relay) |
| Trunk Release Positive Wire Location | At Hatch Release Switch Or In Drivers Kick Panel |
| Sliding Power Door Wire | N/A |
| Sliding Power Door Wire Location | N/A |
| Horn Negative Wire (-) | Blue/Red |
| Tachometer Wire Negative Wire (-) | Blue |
| Wait To Start Wire | N/A |
| Brake Light Positive Wire (+) | Green/White |
| Factory Alarm Disarm Wire (-) | Green/Red |
| Factory Alarm Disarm Wire Location | At Security Module. The security module is located under the drivers front seat on the 2- door models, on 4-door models, it is in the trunk behind the left rear seat. |
| Factory Anti-Theft System Location | N/A |
Feel free to use any 1989 Acura Legend alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1989 Acura Legend car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1989 Acura Legend.